| Thread | Last Post | Replies |
|
| WANTED used crossovers. | 15 Jun 2005 01:58 GMT | 1 |
I am looking for a set of Rockford Fosgate crossovers. They are from the FanaticX series component sets. FNX242x 2-Way Crossovers
|
| Need help for installer in Austin, TX and recs new speakers | 14 Jun 2005 23:56 GMT | 1 |
Does anyone have any recommendations for installers in the Austin (TX) area? Or should I just do it myself? I had Mobile1 do my last install in Houston; however, I have had to go back and do everything the way I wanted and fix some of their screw-ups. Needless to say I
|
| INNOCENT | 14 Jun 2005 19:59 GMT | 11 |
MICHEAL JACKSON CLEARED OF ALL CHARGES
|
| Who knows the Website of ESX Amplifiers????????????? | 14 Jun 2005 17:52 GMT | 8 |
Hello you all, Can someone help me to find the website of the manufacturer ESX who make Car Hi-Fi equipment? Websites of ESX dealers also be apericiated.
|
| Car radio installation help | 14 Jun 2005 04:04 GMT | 8 |
I've recently bought a Citroen AX (1.0 petrol - 1993) and think the radio has been wired up incorrectly - the radio goes off when the headlights are turned on! The radio manual is here (page 27):
|
| Apline Aux In AND CD Changer | 14 Jun 2005 01:37 GMT | 5 |
I have a 12 disk Alpine changer connected to my old Alpine using (i believe) aiNet...i would like to buy a new head unit that has BOTH an Aux In and the ability to use my CD Changer...It is hard to know the ones i'm looking at sometimes say, "aux in" but some are using the adapter ...
|
| in-dash mini-disc players | 13 Jun 2005 12:20 GMT | 2 |
i'm having a hard time finding a retailer (online or otherwise) who stocks new in-dash MD decks. i've had one before that i bought from someone on eBay, but this time around, i would rather buy one new. anyone know of a retailer?
|
| JL W7 Made By ID? | 13 Jun 2005 09:57 GMT | 3 |
I'm taking part in a discussion on another forum about a "rumor" that Image Dynamics was the original manufacturer of the W7. Then JL apparently purchased the right to manufacture it. Anyone heard anything like this? Anyone care to chime in that actually knows one way or ...
|
| speaker fit(s) | 13 Jun 2005 03:35 GMT | 4 |
In my Grand Caravan, some sites say 5x7, but crutchfield says a 6x9 will fit in the doors,and doesn't even add in an adapter for fit. Do you folks know any different? If I can have 6x9's of course there are many and better choices and I won't need to add a sub. Also, I will be ...
|
| Who knows the Website of ESX Amplifiers????????????? | 13 Jun 2005 00:42 GMT | 1 |
Hello you all, Can someone help me to find the website of the manufacturer ESX who make Car Hi-Fi equipment? Websites address of ESX dealers are also be apericiated.
|
| Cell Phone Mute Lead - Gnd/+12? | 12 Jun 2005 19:46 GMT | 1 |
I am using a Clarion DXZ835MP head unit, and would like to start using the cell phone mute lead to attenuate/mute the system output. I would like to use a simple switch to activate the feature (no hands-free cell phone kit), but I'm not clear on how it works. Does it activate by
|
| power source for 12v in car LCD screen | 12 Jun 2005 19:27 GMT | 1 |
I was after some advice regarding powering an in car 8 inch 12 volt lc screen I got a new dvd head unit but I have since found that by lcd screen ha a ciggarette lighter connection which does not work in my car.
|
| What are your opinions on the MTX Thunder 500D in a "higher-end" system | 12 Jun 2005 03:30 GMT | 4 |
I was wondering what your thoughts were on the MTX Thunder 500D amplifier. I've had this amp in my setup for a while now, and it's never given me problems, but I'm unsure whether I should keep it or not in my new setup, which will definately be more highend that what I
|
| Car audio - amp problem - blowing fuses.. . | 12 Jun 2005 02:36 GMT | 3 |
I've got a little amp powering two speakers (which has been working fine for months, until now). Anyway, after installing a new head unit, which works fine, it was all going fine till i turned on my headlights, then (for whatever reason) the 25A fuse in my amp blew.
|
| this one might take some thought "crossover frequencys" | 11 Jun 2005 15:50 GMT | 6 |
if my 10" sub is tuned to 18 - 60hz my 2 8" midbass are 50 - 140 what should my 4 4" mids be? and what should my 4 1" tweets be?
|