i in installed a new car stereo into my 1985 chevy truck. there are two
wires for each speaker from the stereo but only one wire per speaker.
how should i wire them together?

I have a VW and recently both speakers in the front were working. Now
only the speaker not working is on the driver side. All other speakers
work, what is goin on and how can I fix the speaker?
Thanks

My roomate just got a new audiobahn amp we can't get it to work? It has
power and the capacitor shows 12.5 its as if there is no music going to
the amp. Has anyone ever had their rca's on the deck go out? Or any
other suggestions?

I just got in my pioneer W306 DVC sub (12") and I had a question. I'm wiring
into a 2 ohm load (parallel) when I wire from the terminal cup to the sub 1
wire goes in there, then do I stick another wire in the sub (say the
negative side) and then connect that to the other negative ...

I'm looking for some advice on buying a cd player for my car.
Renault Megane 1998 with steering controls and dash display.  And I'd like
to be able to use these features with the new cd player.
Can anyone recommend a unit that is radio/cd & MP3 and that is compatible

What size are the speakers in the front doors? Crutchfield has 6.5 and
5.75 that supposedly fit. Does that mean they are 6.5 and you have to
use an adapter to fit the smaller speakers? If I remember correctly
someone here once said the Silverados actually had an opening for a 6 ...

I'm a rookie on this, so forgive me if this is a stupid question. I
have a Pioneer P6900R headunit with built-in rca auxiliary inputs. As
far as I can understand from the manual, it is an input for any extra
device. I enabled the 'AUX' source channel on the headunit. I thought

I'm about to install a second amp in the boot/trunk of my Toyota Camry
2000 CSX.
I've already installed the below:
JVC KD-DV6105

I just purchased a 2002 Ford Focus with a previously installed Qwestar
DVD player/monitor.  I can get the monitor to turn on, but I cannot get
power to the DVD player itself.  According to
http://www.discountmobilevideo.com/images/qwestarmvp360elect.jpg, I

So I'm in dilema witch one to buy.

I am looking at getting a set of 6.5" component speakers for new car. I
will be running them using a bridged 4 channel alpine 3553 amp to
create 2 channels capable of driving 100w rms each @ 4 ohms. The
bass/midbass driver will be located at the bottom of the door and the

I know the most popular box material is MDF and some use plexiglass as a
window. What size MDF are you guys using (3/4, 1" etc.) what are the main
difference between thicknesses? well, to ym random thought...I was wondering
if there exists (or if anyone has made) a box out of ...

I dont know if this is the right place to post this but I had an idea
about connecting a computer hard disk to a alpine headunit via the
stacker to store mp3s.  Has anyone ever attempted this or has any idea
if this is posible.

would like to replace current factory Bose cassette receiver with a
Bose-compatible single cd receiver.
any suggestions?
thanks,

I recently replaced the tape deck in my car with a cd head unit & changer.
However, the sound was distorting at the lower frequencies so I replaced the
front door speakers with 3 way speakers to improve the sound quality,
particularly the bass frequencies and to get rid of the ...