| Thread | Last Post | Replies |
|
| Possible to Replace Factory Videotape Player With DVD Player? | 08 May 2006 12:37 GMT | 3 |
2003 Ford Windstar has a vhs tape player by Autovision that fits in and quick connects to a floor mounted console. The video is displayed on an overhead drop-down screen. This was Ford's factory instaled entertainment system. We would like to move on to a DVD player, but
|
| Kenwood KDC-MP922 problem | 08 May 2006 05:40 GMT | 2 |
Hey all! Long time no post. Anyway, I have a Kenwood KDC-MP922 thats giving me some trouble. Every time I get back into my truck I have to hit the reset button on the deck to make it power up. It will open up on its own but it will sit there as though it
|
| Old school sub vs new tech | 08 May 2006 01:06 GMT | 7 |
I'm putting together a hodge-podge system for my wife. Here's what I have: eclipse 56050 Monitor Audio Car6
|
| How do you remove stock HU of '97 Ford F-250 Power-Stroke Diesel? | 08 May 2006 00:08 GMT | 36 |
I need some expert help, here. I'm doing a job for a friend and I am THIS CLOSE to taking a LARGE HAMMER to his dash!!!! I have mostly worked on foreign cars in the past so this is....uhm...foreign to me. I have tried removing all the trim pieces close to the HU but that
|
| Sub Box Questions | 07 May 2006 22:47 GMT | 3 |
I just recently purchased a pair of JL Audio 13.5 inch Subs, but they were installed in a box without a divider to seperate the two speakers airspace? Does this even matter? Should these also be completley sealed air tight?
|
| newbie install advice | 07 May 2006 17:31 GMT | 6 |
I have a 2000 jeep cherokee with factory speakers and a aftermarket sony cd player. the cd player was installed as a christmas present by....*gasp* best buy. as expected, the install sucked. The radio will lose power very often making it useless to set channels and time. they
|
| Bridges? | 06 May 2006 12:25 GMT | 1 |
Hi I am completely new to the whole audio thing all ive done is install a radio and two speakers. Could anyone tell me the workings of a detailed in car stereo system. Plus + what the hell is a bridge?
|
| Help installing dvd/flip-screen | 05 May 2006 22:15 GMT | 2 |
Hey guys, I have been trying and tryng to install this damn thing and it is being a thorn in my side. I thought I was good at installing this kinda thing but I guess not.
|
| SONY XM-2020 | 05 May 2006 18:16 GMT | 1 |
I bought at Ebay a Sony XM-2020. Unfortunately the conection cable is missing an it´s not possible to download a user manual from the sony website. I need the pin assignment to connect this Amp. If you have this Amp can you give me the assignement? Many thanks for your Help.
|
| Problem with Pionner AVX-P8DVD | 05 May 2006 18:15 GMT | 1 |
Hey Guys, I am having a problem with a AVX-P8DVD and am hoping someone can give me some suggestions. I bought this used and was told it worked. I tried testing it just hooking up the yellow(Positive) and red (Acc) to
|
| New Midbass Driver? | 05 May 2006 11:23 GMT | 10 |
I currently have the MB Quart QSD 216 set and I'm not quite sure about the quality of my mid-bass. What do yo guys think of those drivers and would you recommend another one?
|
| Possible to recombine crossed over (split) component speaker wires? | 05 May 2006 09:16 GMT | 35 |
I need to upgrade the crappy component speakers in my car. But the crossovers lie within the front and rear amps. I really don't want to have to replace the amps. The quotes I've seen thus far are about $2000 to replace just the front speakers and amp, and a front/rear
|
| Selling my amp. Good for a pair of 6x9's even 10's | 05 May 2006 08:31 GMT | 3 |
This is the auction I have on ebay. Bought a 4 channel amp and don't need this one any more. Also need to pile up some $$$. Good luck. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9721884917
|
| SQ Tips | 03 May 2006 18:44 GMT | 12 |
Anyone have any SQ tips for me?
|
| MTX TXS 840 8" subwoofer | 03 May 2006 17:13 GMT | 1 |
I got a pair of old, not even sure how old never used mtx subwoofer's but don't have full specs. I've search all over the place for these but there is no mentioning of these anywhere on the net.... As far as specs that I have (on the box) all i got is impedance, power,
|