Is there another way to perform the following process (in the rac FAQ,
section 2.1.1):
"After you have determined that there is noise in the system,
determine if the amplifier is causing the noise. To do this, mute the

Does anyone know how to PLAY the CD on Pioneer KEH-P7005, because
there is no direct PLAY button on the CD deck and the remove control
is broken.
Thanks.

I have an Infinity Reference series (7521a, 97W RMS x 2) amp that,
when under load, cuts off only the high frequencies (both channels).
If I lower the volume on the HU, the highs come back and can endure a
few more minutes of load if the volume is raised again.

HI,MY NAME IS DYNOMAN AND I'M NEW ON THIS FORUM.MY HOBBY IS CAR AUDIO
INSTALLS AND UPDATING CARS. I LIVE IN MURFREESBORO,TN AND I HAD MY CAR DYNO
AT THIS PLACE CALLED PERFORMANCE CONCEPTS.THESE PEOPLE WHERE ABLE TO GET MY
TRUCK 38 MORE HP THAN WHAT I HAD AT FIRST.AWESOME

has anyone ever used ond of there amps??? is it a good amp??? hane any
problems with it?

Is it possible to wire 4 subs when two of them are 8-ohm SVC and the
other two are 4-ohm SVC? The amp is 4-ohm stable bridged. Appreciate
the help

I have a old Pyramid EQ that, when it gets hot out and gets worked
pretty hard starts transferring all the signal to just the right-side
speakers, front and rear. Is this just a sign of overheating? When i
notice this starting to happen i simply just turn on the floor vents

ok so i got a quick question: so if i wire my rockford fosgate 15" sub
8 ohm impedance down to 4 ohm will the power handling of the sub
double or stay at 200 watts? so will i beable to use a 250 watt RMS
amp at 4 ohms or will i need a more powerful amp?

I am selling my classic 77 Cutlass which has a nice sound system well
nice sounding anyway really loud and no distortion or breaking down.
I would like to keep the Nakamichi PA-150 I have and replace it with
something that sounds as good for the buyer but not expensive.  Oh yeah

I bought a new cd player (sony xplod) that does not have RCA ports in
the back but i have a sub woofer.......i dont know much about car
audio at all so my dads friend helped to hook it up and he had to use
some blue wire i think it was the amp wire or somthing but he hooked

Im wondering what the top of the line cassette decks were when they were
out. The ones Im interested had Dolby C and 20-20khz response. I have a
Pioneer system and would prefer to stick to that brand. Im aware Pioneer had
a KEH-M8500 which would be good, but its not a P model for ...

I'm asking this here rather than the UK group, as the VR3 brand is not
well known in the UK.
As I understand it, it is part of Roadstar(which are available in the
UK)  which don't have a great reputation for quality.

I just bought a car with Pioneer KEH-P7005 CD player installed, I want
to ask, if anyone who has this kind of player before knows how to PLAY
the CD, because there is no PLAY icon in the CD player nor Remote
control.

I have some extremely rare tweeters that I need to protect. Can
anyone recomend the size fuse I should use to stop at say 100 watts and
at 200 watts?
TIA

Read all about it...
http://www.tech-man.com/brinks.asp
Thank you all for your continued support.
Jim Rojas