I drive an 89 Nissan truck with that wonderful Z24 engine.
In the  Summer it starts from cold   - no problems
Now that Fall is here and the weather is a bit cooler, when I start from
cold, the fast idle is very fast - much, much faster than it is in the

I'm the lucky owner of a ... Rambler: 1965 Classic 770, 6 cylinder
with a 1-barrel 1920 carb.  Built like a tank, but every once in a
while ...
A few weeks ago, she was stalling intermittenly and 'missing' so bad

Has any one used a 9007 Bulb in a 9004 Harness. i know if you do this
the High beam will be on(will re-aim). Just wounding if i do this will
i damage any thing like the harness or elec system?

Following is the text of a webpage at
http://www.totse.com/en/fringe/fringe_science/pcv.html which claims that this
homemade PCV valve modification device increases gas mileage and burns cleaner.
I am thinking of making one for my car. What do you mechanics think?

I picked up an Edlebrock 4bbl intake (used) and a Holley 4bbl carb (supposed to
be new) at a swap meet and installed on a 1970 Cougar with 351C and having
symptoms of vacuum leak (<10 MPG, idles a little rough, flat spot at partial
throttle, backfire/cough when you punch it a ...

My Intrepid, ran >202K mile, started leak its transmission oil between
mission assembly and engin.
I can't figure out where do I need to fasten up.
It's leaking somewhere between engin and transmission.

Hi all, I have a 93 chevy 1500 pickup that has the V6 in it and I wanted to
swap in a V8. The 6 cylinder engine is tired and I need more power for towing.
Anybody ever do this swap? I'm just trying to gather info before I start
pulling engines and creating more headaches.  Any ...

i own a 2002 yukon . i had auto start installed when i bought it. i paid the dealer for this thing so is this covered under the warranty since i paid the dealer?

I've got a 99 Nissan Altima.  Since I got it a few months ago I've had
trouble getting it to shift into 1st gear (it's a manual) first thing in the
morning, and sometimes after using reverse.  I've changed the trans fluid
but that hasn't helped.

No warm air coming out of heater. Any idea what is wrong?
thanks
NC

Is there such a thing?  Is it practical?  I know we have these units for
confined space checking etc., but they are a few thousdand dollars and check
breathable air mainly.

I have Mazda prot?g? lx 1.5 dohc 109 k miles.
I went to one "reputable" tire shop chain, and ask them to do
coolant flush, oil change, and alignment. It was $ 130.
I took the car, drive it home, and see that oil was overfilled,

I have been arguing with a co worker about Mazda b3000 truck where it
is made.
I know that it is basically a ford ranger with Mazda labels. I was
told to do my homework and its only 38% ford. I say bull! Can anyone

I accidentally bought a case of 0W20 Mobil 1 (the case box says it's
"equillivant to 5W20"...huh!?).  Anyway, this case is to restock the oil I use
to keep topped off between oil changes only.  The car is spec'd for 5W30.  I'm
thinking it's not a issue to use a quart or less of ...

Can someone please point me to a walkthrough or provide info on
changing a 95 cavalier's serpentine belt tensioner?
It's the 2.2 engine. Also, am I going to need any special tools for
this job? Thanks to anyone who can provide some info!