I'm finally about finished rebuilding the steering & front suspension on my
89 maxima...  first time I've done this & made an errors that cost about
250 dollars extra to correct.  (specifically tightened ball joint mounting
nut a little too tight)  Had to buy spindle hub parts from ...

Hello, I have a tiburon that had started stalling in april of this
year. It can stall anywhere form 0-20 times a day. After bringing it
back to various dealers over 20 times it finally died and wouldn't
start.  Only to start up again an hour after it died.This was as of

This morning I replaced 4 tie rod ends (inner + outer) and the pitman
arm on a 95 chevy G10 4.6 v6 van.
Was I supposed to use some type of 'pusher' tool to screw the pitman
arm back on there? I bought a cheap ampro pitman arm puller from

I am going to be changing the timing belt on an Acura.   I'm putting in a new
water pump and while I am at it I am going to flush the cooling system and put
in new coolant.  The owners manual recommends using Honda coolant.  Is any
other coolant a direct replacment for Honda ...

What's going on in the car forums?
Bentley Forums
- - - I used the ash tray today. How do I replace it?
Camaro/Firebird Forums

This Caprice has 350 with throttle body fuel injection.
It has black smoke on startup and throttle, and throws smut
from the exhaust as well.
And it takes about 5-10 seconds to start after it has been sitting

Our 1999 Chevy Astro has a problem with the accelerator. After the van
has been driven for a while and the engine gets to normal operating
temperature and then you park the van and turn off the engine, when
you get back in the accelerator pedal sticks when you first push on

1992 Toyota Cressida, 200K.  All hoses replaced a couple of years
agos.  New radiator about three months ago (was leaking badly).
Cooling system fine since then.  Then, last Friday, I get off the
subway and head up I-270 toward home.  In the rearview mirror I see

I have a 2000 Chevy Silverado Z-71 pickup.  It is a 4x4 automatic.  Since
the 4x4 works on a pushbutton system and it has a 'neutral' button, does
this mean I can safely tow this vehicle on all 4 wheels for long distances?
I'd hate to have to climb under and keep connecting / ...

I have a 1987 Ford F-150 pickup with two wheel drive.
I have noticed a looseness when I am holding the steering wheel.
I removed the horn pad and checked the torque of the big steering
shaftnut and it was ok.