| Thread | Last Post | Replies |
|
| clutch & turbo charger | 06 Dec 2004 14:09 GMT | 2 |
I have a 1992 PLYMOUTH LASER 4 Cylinders 122 U 2.0L MFI TURBO DOHC. With a 5 speed manual transmission. Several months ago the timing belt went out. After replacing the belt I noticed that when I get on the gas a little hard that there is a loud roaring noise and some
|
| 1983 lincoln starting problem | 06 Dec 2004 11:25 GMT | 8 |
I have a 1983 lincoln that starts eventually and runs perfect. The problem is I can't get it to start without the addition of a bit of gas or starting fluid to the air intake. The engine then fires up without fail. I've changed the fuel filter already and am getting a
|
| 89 Topaz heat gauge | 06 Dec 2004 06:42 GMT | 1 |
On my 89 Topaz the heat gauge will come up from cold to normal when first starting the car. After about 15 minutes or so it will suddenly drop to zero for a few minutes and then bounce back up to normal. On the highway is seems to stay on zero more thnn normal. The gas gauge
|
| Transmission slams when put into reverse | 06 Dec 2004 04:11 GMT | 1 |
When my I first start my 2000 Buick Lesabre and put it into reverse, the transmission will slam and the car jerk. However when I put into forward it doesn't do this so to get around the problem, I first put the car into forward which causes the idle rpm to go down, I quickly
|
| HVAC problem | 06 Dec 2004 03:51 GMT | 4 |
My 1994 Beretta has a heater/AC control problem. No matter where the selector dial is set, the air always comes out the same vents. The fan works properly and the air is correctly heated. I assume this is probably a vacuum problem. What I'm hoping someone can help me with
|
| Help - Interpreting OBD-II codes???? | 06 Dec 2004 03:21 GMT | 3 |
I have the Actron OBD-II code scanner which does a good job at retrieving trouble codes. However, how do I interpret each code??? In other words, how do I go from a P1236 code (just an example I made up) to knowing which component is faulty???
|
| 99 passat C/V joint boots | 05 Dec 2004 22:53 GMT | 2 |
Generally, what else (if anything) must be done when these boots crack/deteriorate besides replacing the boots? What would be a fair cost for this?
|
| Why Can't My Mechanic Smell Gas? HELP! | 05 Dec 2004 18:25 GMT | 10 |
I've had an ongoing problem with a gas smell in my Ford Ranger (only about 5 years old, too!). The smell is quite intermittent. Sometimes it's several minutes after the first engine start-up of the day, other times it's the 3rd start
|
| Gas tank leak | 05 Dec 2004 16:39 GMT | 7 |
Can a gas tank leak generally be fixed without having to replace the tank?
|
| Need more information about CEL. | 05 Dec 2004 03:10 GMT | 1 |
I've been having this problem about the manifold crack in my Kia rio 2001. I tried to use J-B weld on it and well it didn't work, J-B turned litterally into dust.
|
| Only Fill Gas Tank Halfway? | 05 Dec 2004 01:19 GMT | 23 |
A Saab dealership told my Mom who fills up her tank about once every two months to only fill the tank halfway so that the gas doesn't get old. Will gas really deteriorate over a two month period? I would think that if you only fill tank halfway, then there in more chance for ...
|
| Quality of Hyundai, Kia, Suzuki etc.??? | 04 Dec 2004 23:42 GMT | 4 |
How well do these cars hold up over time? I'm looking for an inexpensive no-frills used car with relatively low mileage. I'm not too concerned if if's not comfortable, if it's noisy or if it's kind of gutless, as long as it gets me too work and to the grocery store and holds up ...
|
| Radio fault help | 04 Dec 2004 18:53 GMT | 8 |
Can someone please help? I have a Kenwood KDC - 4070R CD player in my car. The problem is that it has recently developed a problem. If I don't use my car for a day or so the radio will not work no red
|
| Car Thermastat Questions | 04 Dec 2004 18:06 GMT | 8 |
I have a 99 Plymouth Breeze. I didn't get any heat at all this morning, I popped the hood and saw the anitfreeze was very low. I filled it 3/4 until the fill line. I notice the temp gauge on the dash fluctates between 1/4 and a little below half. Any ideas what's the problem is, ...
|
| Wheel Alignment or New Tires First? | 04 Dec 2004 14:55 GMT | 5 |
(please assume the writer of this question doesn't know the basics of auto care - because I don't!) I'm planning on buying new front tires, and my car also needs a front end alignment. Should one of these 2 things come before the other?
|