Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / February 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
need quick advice- buying used car11 Feb 2005 19:46 GMT8
my 180k 93 escort is rusting through, and i want to get a car i can
trust to last a while longer.
i just found a private seller with a 93 mercury tracer (same car),
180k. its in good aesthetic condition. pretty much no rust at all.
Types of idle controllers/sensors?11 Feb 2005 17:14 GMT3
I have a '90 Nissan Bluebird and have had trouble with the 'idle air
control valve', according to my Nissan mechanic, where the car had a
high idle and was prone to jerking. This valve was replaced with a
second-hand one and both problems were fixed, until a couple of weeks
Geo Metro Gauge problems10 Feb 2005 23:25 GMT42
I have a Geo Metro (1992, 2 door, 3 cylinder) and the fuel and
temperature gauges have started to act crazy. The temperature gauge was
particularly alarming because it indicated that the car was
overheating. I had a mechanic check it and he said the temperature is
Speed Limiter10 Feb 2005 20:37 GMT25
Is there a speed limiter or governor that is available for a 02 VW Golf?
OK to flush used oil down the toilet?10 Feb 2005 20:27 GMT23
If I change the oil on my car, is it ok to flush the used oil down the toilet?
Rough downshift after fluid/filter change10 Feb 2005 17:03 GMT3
2003 Dodge Grand Caravan, 3.3L engine, 30K miles
On Saturday I changed the transmission fluid and filter on our van.
Relatively straightforward job.  Used Mopar ATF+4 fluid and Mopar filter.
Ever since, the downshift from OD to 3 has been fairly rough - more like a
Awful gas smell10 Feb 2005 03:33 GMT6
OK guys...I figured out what was wrong with my car (93 Cavalier RS),
but I wanted to see if anybody else had this happen to them.  It turns
out the terrible smell I've been getting has been gasoline.  One of my
fuel injectors is leaking and it's stinking up the car pretty bad.  But
Engine cuts off - '98 Honda Civic EX09 Feb 2005 22:05 GMT4
A friend has a '98 Honda Civic EX, and lately experienced several
instances in which the engine simply shut down while traveling.
The first four times this happened, the engine could be restarted
immediately.  This last time, he had to wait some time (half hour
Honda power loss09 Feb 2005 13:14 GMT5
I have an 86 Honda Accord (carburated). When it is cold and wet it
loses power until it cannot hold speed. If I turn it off for about five
minutes, the problem goes away for about 20-30 minutes and recurrs. I
have replaced fuel filters, fuel pump and had the fuel pressure
97-2000 jeep cherokee turn signal problems08 Feb 2005 22:17 GMT5
I need some help have a 99 cherokee when I put on left turn signal my flashers
go on. Have heard the same thing happening but brake lights or all lights will
go on when blinkers used. If you have a 97-2000 cherokee not grand just the
cherokee I can use some help Thanks
Geo Metro - No electrical power at al08 Feb 2005 20:36 GMT6
I fear the worst, but hope someone here can give me some cheap
alternatives.
My wife took the portable jump starter and decided to use it as a
batter charger while the battery was still hooked up to the car.  Not a
How to replace a defective hamster in my car ???08 Feb 2005 18:58 GMT4
My car is powered by 100 hamsters, but now 10 of them are dead.What can I do now ?
97 maxima - Trouble starting - neutral safety switch replacement didn't fix it08 Feb 2005 15:10 GMT1
I have a 97 Maxima that I bought used 3 years ago. It has an annoying
habit of not always starting. Pushing the shifter firmly forward would
usually allow it to start on the next attempt. Recently the problem has
gotten much worse, sometimes it takes many attempts, holding the
looking for welder opinions08 Feb 2005 14:50 GMT3
I am looking to purchase a welder soon. I will be using it to weld a
little bit of everything. We run circletrack racecars, and will be
welding rollcages, frames, on the trailer when needed, sheetmetal, and
whatever else around the shop! I was looking at Tractor Supply today,
Change sepertine belt on 1998 Olds 88 ?08 Feb 2005 14:44 GMT1
I am going to change the serpenting belt on on a 1998 Olds Delta 88 .
Which motor  mount bolts do I need to remove ( the one thought the
bushing or the the two which hold the lower part of the the motor mount
to the body .
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 January, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.