Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / March 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
vacum problems26 Mar 2005 04:28 GMT4
i have a 88 celebrity  and i have no vacum going to the egr valve and to
the cruise control. can any one explain. thank you.
removing skunk odor25 Mar 2005 18:12 GMT13
First time posting.  The other evening, a baby skunk crossed my path as
I was driving through town.  I didn't want to hit the animal so I
slowed right down to a stop.  Well, for my efforts, the skunk sprayed
the underside of the car & the smell permeated the entire interior.  I
WHAT BS ARE YOU PEOPLE TAKING?  HYDROGEN IS THE FUTURE25 Mar 2005 15:25 GMT4
Where do you people get your conclusions?  Hydrogen is the future because I
SAY SO.  Hydrogen will be released by using nuclear energy and pumped
throughout a Hydrostation grid nationwide.  I have two college degrees in
Hydrological sciences
ford f250 1986 tires sagging25 Mar 2005 05:06 GMT8
I recently bought an '86 f250 with a fisher plow for $500.  The truck
runs great and the plow is in good shape.  The most noticible problem
is that the front tires seem to sag outwards at the bottom(/-\).  And
the right wheel is pointing out a little more than the left wheel. The
Question: Pontiac Grand AM25 Mar 2005 03:59 GMT5
Where is the OBD II connector located on a 2000 Pontiac Grand AM?
On my 1999 Honda Accord--it's located under dash--driver's side--near fuse box.
Is it located in the same place on a 2000 Grand Am?
Thanks in advance,
Van acted very weird (warning lights) and then cut off. Will not start now?25 Mar 2005 03:42 GMT1
Jumped my 1993 Chevy Astro today. Its been sitting for a while. Started
fine and ran for about 5 minutes. Went to move it and turn it around to
repark it. Noticed the voltage gauge was pegged to the left (forget the
reading) normally in the middle. The check engine light was on as ...
Another squeaky brake thread25 Mar 2005 03:18 GMT3
I hope nobody minds, but this is posted in rec.autos.makers.saturn as
well.
I'm the proud owner of a 1993 SL2.  I bought it used last year (I
prefer the pre-1995 Saturns), and it's just over 100K.   Recently (a
FULE CELLS - NEW ANSWER TO MORE MORONS25 Mar 2005 02:38 GMT4
Again on Hydrogen economy, someone raised an obvious point of how to obtain
Hydrogen from the oceans:
Yes i know it takes energy to release energy to our convenient form, because
energy is not created form nothing, basic physic's law!  I iknow, but it's
Caprice Impala 197825 Mar 2005 02:37 GMT1
    I'm looking for information about Impala model 1978
what I want is the oil capacity of 4.1L engine automatic transmission.
Thanks very much
Zizo
Pontiac Grand Prix instrument panel and other lights out?25 Mar 2005 01:17 GMT5
I am having problems with interior lights on a 2000 Grand Prix.  The
instrument panel lights, steering wheel controls illumination lights,
dimmer control lights, window and door lock lights, heat and air
control lights are ALL OUT.  However, the radio lights, check engine
How to fix sluminum alloy wheels (scratches)?25 Mar 2005 01:04 GMT6
Can you people suggest how to repair aluminum-alloy wheels: heavy
scratches/bruises (from curbside parking)?
Aluminum-alloy cast construction, finished is powdercoated paint (baked on)
and clear-coat - high gloss, SILVER color.
dirty fuel tank25 Mar 2005 01:01 GMT9
I nearly let my fuel tank run empty, and noticed a lot of water vapour was
coming out of the exhaust.  So I intend to let it run to nearly empty again,
add some petrol and also something else to mop up the water.  Is this wise,
and what should the "somethng else" be?  I'm a ...
FUEL CELL - HYDROGEN FUTURE24 Mar 2005 17:23 GMT20
I want to let you know my current car is the LAST gasoline car I ever owned.
Next is hydrogen, 500 GM people and uniknown # of FORD people are working
day and night to bring hydro future ASAP, they replied to my emails but of
course no exact dates due to trade secrets, already ...
Piston ring groove questions24 Mar 2005 15:55 GMT5
What is the most common (or most likely) reason piston ring grooves become
excessively wide?
Does piston slap contribute to widening of the piston ring grooves?
Slick 50 - FROM THE BEGINNING?24 Mar 2005 15:31 GMT53
First, a thank you to all who contributed to making my Ford Contour last
to 156K before I traded it in.
Now I've got a 2004 Ford Taurus, purchased in February at 20K miles
(Certified pre-owned, 6 years/75K warranty).  I'm ready for my first oil
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 February, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.