| Thread | Last Post | Replies |
|
| Mitchell on demand DVD | 31 May 2005 22:02 GMT | 9 |
any techs out there that work in a shop using mitchell on demand dvd? i am looking for 2004 or newer dvd sets. both Import and Domestic. I know that mitchell sends you guys new dvd every quarter so i would like your old ones.
|
| Auto weatherstrip | 31 May 2005 19:56 GMT | 2 |
What grease should be used to condition rubber weatherstrip? Thanks
|
| importance of torque signals in steering wheel | 31 May 2005 04:09 GMT | 1 |
Sir, I want to know importance of torque signals from steering wheel in electronic power steering system.How it is related to the motor asist power in electronic power steering system.
|
| Just Curious..... | 31 May 2005 03:19 GMT | 3 |
It is now against Federal law to point a laser at an airplane....... Why are cops still allowed to point lasers at motorists?????? Exposure to Microwave radiation (RADAR) has been shown to have a cumulative effect that can result in various cancers. There is evidence
|
| how long does it take gas to "mix?" | 31 May 2005 01:23 GMT | 5 |
Got an '88 Porsche 944, previous owner put some silly performance chip in it which tends to make the engine run rich at WOT and necessitates premium gas (can you tell I'm not overjoyed with that?) Anyway I think I got a tank of bad gas, I filled up at a station other than the ...
|
| Car Shifts into Neutral by Itself under Hard Acceleration | 31 May 2005 00:07 GMT | 1 |
My 1987 Plymouth Sundance consistently shifts into neutral all by itself under hard acceleration. It will even shift all the way from the '1' position of the shifter. What could cause this behavior?
|
| HELP-*imitaion* high stall torque converter for the 2.8 - 3.1 liters ? | 30 May 2005 23:50 GMT | 1 |
---------------------------------------------- Posted with NewsLeecher v2.0 Beta 5 * Binary Usenet Leeching Made Easy * http://www.newsleecher.com/?usenet
|
| HELP- 1993 grand prix 3.1L - back exhaust smoke, intake backfire | 30 May 2005 23:45 GMT | 4 |
the car was running like crap, and i noticed that the ignition pack was cracked and arcing, so i replaced it with a used one, and it started up fine. and i was doing an "idle learn" for pcm and the idle came down and it started to surge. then after a
|
| Starting in the cold | 30 May 2005 22:56 GMT | 3 |
hello. got any tips for starting a carb engine in the cold? mine does not want to very willingly. also, i have a couple of alternators for non-car related experiments. the first one is from a toyota 3y engine, and has a 3-in-a-row prong
|
| Auto-dimming mirror questions | 30 May 2005 20:53 GMT | 1 |
I just replaced my '01 Stratus with an '05. The '01 had an auto-dimming rear-view mirror that dimmed whenever it was dark outside. This was nice. The new one however has a different mirror (either a Gentex or a Gentex-clone, as it doesn't say Gentex on it anywhere but
|
| 1995 toyota camry 4cyl/2.2L - rear motor mount replacement | 30 May 2005 20:30 GMT | 4 |
As a total lay person I decided to replace all motor mounts in my camry :) I was not sure what to expect, and even if this can be done in the garage. I put the car on two jackstands and lifted motor pushing on the oil pan up with a screw jack and a piece of wood. Everything went ...
|
| Polishing black panel on rear of GM cars | 30 May 2005 20:15 GMT | 2 |
I have a 2000 Pontiac Sunfire with a black plastic panel between the taillights. The rest of the body polishes/waxes up beautifully, but this black panel is dull and without shine. What should I do/use to bring the lustre back to this black plastic?
|
| Toyota Previa - tire maintenance/replacement? | 30 May 2005 18:57 GMT | 1 |
I have a 1993 Toyota Previa with about 150k miles that was given to me 8 months ago. Since then I've put about 6k miles on it, had trans fluid & oil changed several times, and other stuff. Third owner and I don't have much of a maintenance history.
|
| 96 Geo Metro - axle shaft comes out of transaxle?? | 30 May 2005 17:55 GMT | 1 |
Several weeks after the right halfshaft of a friend's 96 Geo Metro (4 cyl, manual trans) was replaced, his car suddenly stopped. He said his brother crawled under the car, noticed that the halfshaft had become "disconnected" from the transaxle, and "pushed" it back into the ...
|
| steering wheel control | 30 May 2005 16:13 GMT | 3 |
I'm trying to develop a car driving game using a steering wheel.I am recieving two signals indicating the position and torque from the steering wheel.I want to know how the power steering feature depends on these two signals.what impact the torque signal has on the wheel's
|