'89 Grand Marquis, front disc / rear drum. For maintenance, I changed
front pads and changed the brake fluid. Now, pedal is firm and stopping
is good, BUT... first press on the brake gives low but firm pedal,
stopping is strong until the last few feet, then it feels like the

I have a problem with my Nissan Micra '95. Engine works perfectly (no
stalls, power cut-offs), until warmed. After it has reached optimal
temperature (5-10 min.dashboard indicator) it suddenly goes down and I
cannot start it again until chilled! I'm sure it's not getting overheated

Hi group -
I have an '82 F-100 longbed that has a few rusty spots. I want to just
get that "rat-rod" look of black primer, so I was thinking:
buy 2 (?) gallons of flat black primer

Hi, I need to know how much fuel is present in the tank of a car. I
hope is possibile to interface the signal from the tank to the
dashboard indication. Does somebody knows how to interface the existing
signal to exctract data? I'm able to  buld an hw&sw interface.

I need to purchase a J-44298 "Air Bag Removal Tool" in order to pull
the steering wheel off my 2001 Impala.  I haven't been able to locate
it at the KD Tools sites I normally go to online, nor the Kent Moore
equivalent.

Has anyone used this product, and what improvements/benefits did you get?
TIA
Yan

A friend has a 98 TJ and the brake lights don't appear to have power.
The signals work and the emergency flasher works but the brake pedal
doesn't.
I haven't crawled under myself because I am not able, but from the

So I bring my cars in for new tires and alignment. They put the tires
on, but tell me I've got a problem with both front bushings.
Stupid question time: What exactly are bushings, and how badly do they
need to be fixed. Basically, I intend to replace the car ('99 Jetta,

Nissan Maxima Brakes Question - Year 2001
Have 40k miles and noticed brake pads a bit thin. Also a little squeak
out of the right rear brake. There are Disks all the way around.
I usually would go to Nissan as I had a bad experience one time with

I have all good bulbs and a good switch at the pedal, but I am not getting
break lights to come on.  I dont have 12 volts at the switch. I have like
0.2 volts. Strange indeed.
Fuses seem ok although I am confused as to which fuse actually is for those