How do you release the fuel system pressure on a 2002 Chevy Silverado?
I'm planning on changing the fuel filter.
What is a good, safe way to release the fuel pressure on this truck
before removing the in-line filter?

I've got a 1990 E-150 with a 351 engine dual tanks. I've checked the
switches and wiring. I do know the pump in the center tank is bad and
the center tank has some kind of black gunk in it.
Here's the problem... It'll start alright at any temperature and run

I have 1994 sentra E, with manual transmission.
I wonder what is the "neutral switch" used for ?
It shorts signal to ground when thecontrol lever is
in the neutral position - what does my car need it for ?

I have a 1999 Taurus Wagon I left parked all winter. Last month I went
to start it and the battery was dead. I bought a new battery and when
the car started up the alternator light came on.
Now one month later, I have checked the cables to the alternator, put

I have an overheating problem in my '63 Galaxie, 427 Sideoiler (no AC)
bored .030 over to a 454 - seems to be heating up bigtime when I'm not
moving.  Last time it scared me I had been driving with temps around
195.  I stopped to go to the ATM and when I came back the car was

I am looking at replacing my spark plugs in a 3.8l GM engine (high mileage)
and was looking at those NGK G-Power Plugs but a friend of mine says just
put the cheapy AC Delco, because the platinum won't make any difference
except possible quicker starts, but not worth the money... ...

Hey guys,
I have a '93 Mitsubishi 3000gt SL, and I'd like to get your oppinion
about a problem I have with it.
The car oversteers on a right turn. You can really feel it going over

Finally decided enough was enough, and that there was no time like the
present, got all the boxes and packages of stuff together that I've
bought from eBay for pennies on the auto-parts store price, even WITH
separate shipping for most of it figured in, and said "I'm gonna

I had to replace an old  radial tire on my Dodge Ram 2500 on the right rear,
so I was without a spare for a bit.  I decided to carry an old bias ply tire
I had around figuring that it was preferable to no spare in a pinch.  Just
what does happen when you mix a bias and radial tire ...

I recently had My car in to look at why my AC Was blowing warm air and
it turned out to be I needed Freon or what ever They put in to recharge
the AC System. Anyway the whole job took about 1 hour and ended up with
a bill of $169.00 I realize I have to pay for Labor of $39.50/ per ...

Hi - Does anybody know of some sites or instructions for reparing areas
of paint that have been chipped off from stones?
I have searched the internet and can't find anythnig satisfactory.
Typically the instructions are for fixing one chip (which doesn't exist

Hi,All:
I will relocate to a new city and need to buy a new car. I am totally
confused about how to buy a new car?  Can I pick a car online?  Will
dealer take me to a test drive( I don't have a car right now)?

I've never bothered to post to a newsgroup before, but this is
something people need to know!  This may be a bit long, but if you're
thinking about taking your car to NATIONWIDE CRASH REPAIR then please
read this. You'll thank me for it!

First, I not really used to write in english, so sorry for my mistakes.
Ok, now my subject : I am rebuilding my first engine, the XU5J of my 205
gti. It had a rod bearing that failed and spinned in the rod.
I have change the crankshaft for a used one that I took of from an XU5JA

I am in the market for used cars and was checking out Yahoo! used cars.
Some of the prices of it really baffled me and I am just looking for
some opinion on it.
I will post a couple of links: