| Thread | Last Post | Replies |
|
| car battery testers wrong??! | 14 Jun 2005 14:43 GMT | 5 |
My electricity in my car was not working, so I went to a shop where they tested it and my alternator. They said the battery was bad, so I bought a new one. Now, I just bought the old one 6 months ago, so I knew it shouldn't be
|
| O2 sensor dies AGAIN | 14 Jun 2005 14:33 GMT | 2 |
I have a 4-cylinder 03 Toyota Camry (Five speed manual) made in Japan. Seven months after delivery the air fuel sensor that plugs into the manifold directly behind the radiator died. Replaced under warranty. Seven months later, died again. Replaced under warranty.
|
| Flasher on 1997 Monte Carlo LS | 14 Jun 2005 12:02 GMT | 1 |
Does anybody know where the FLASHER is on a 1997 Monte Carlo LS? I tried following the sound with my ears but failed. Currently the flasher is not completly bad as it still flashes period but it does in fast intervels unlike it should.
|
| How a manual transmission works... a question | 13 Jun 2005 23:47 GMT | 23 |
Trying to understand more about manual's, and came across this excellent article: http://auto.howstuffworks.com/transmission5.htm However, here's the part I don't get: What is preventing the driver
|
| toyota camry | 13 Jun 2005 19:38 GMT | 1 |
hi i have a 1993 toyota camry ,my distributor keep borning out, what do you think the problem is?
|
| FWD Buick 3800 and Chevy 2.8.. same bellhousing? | 13 Jun 2005 18:27 GMT | 2 |
Hello, just wondering who can confirm or deny that these would be the same. Having googled through the NG, some people say yes some say no. I've got an 88 Park Avenue that the damned 440T4 gave up on. There's a low-mile 440T4 for sale close to me, but it was from a 2.8 application ...
|
| Car that sat for a while. What to look for? | 13 Jun 2005 10:29 GMT | 9 |
I'm looking at purchasing a car that sat idle for several years. The car starts OK, seems to run fine, and has no driveability issues. No fluid leaks. I'm wondering what else to look for prior to the possible purchase, and what
|
| 2000 Ford E-150, Air Conditioning, and Engine Hesitation | 13 Jun 2005 03:41 GMT | 1 |
Our 2000 Ford Econoline E-150 Van with the 4.6L V8 shows engine hesitation at times, but only when the air conditioning is turned on. Any help with diagnosing the problem is much appreciated.
|
| Best way to pull U-joint snap-rings? | 13 Jun 2005 02:08 GMT | 9 |
Subject pretty much covers it - What's the best way to deal wth the snap-rings that hold a U-joint together? Best I've managed to come up with so far is a pair of "crossed screwdrivers" to push them off - Seat the blade of one screwdriver against the right side end of the clip,
|
| GM styling | 13 Jun 2005 01:21 GMT | 12 |
How can one company so consistently produce the most god-awful styling across so many brands and in both their car and truck lines?
|
| Alternator Sound Like The Possible Problem ? | 12 Jun 2005 22:44 GMT | 2 |
Not very competent regarding technical matters with cars, so please excuse a dumb querstion: Have an '84 Cressida. Generally runs just great.
|
| How to turn an automobile into a lawnmower ??? | 12 Jun 2005 15:33 GMT | 10 |
I need a powerful lawnmower, so I need advice how to turn an automobile into a lawnmower. What do I need ?
|
| Help with Mazda B2200 (PLEASE) tranny problem | 12 Jun 2005 15:17 GMT | 6 |
We have a 1989 Mazda B2200 (short box, reg cab) with an Automatic Transmission. 2 months ago it started to slip so we had the Trans Oil changed and the system flushed. IT WORKED (for a while). Now this week it is started to slip again and it is getting worse by the day to the point ...
|
| 440T4/4T60 has no first gear?! | 12 Jun 2005 15:07 GMT | 9 |
Hello, I would greatly appreciate it if someone had some insight to share. I've dealt with just about every automotive system before, but auto trannies have more or less been a "black box" to me. Have only done minor things like fluid changes and a TH125 torque converter
|
| Renault scenic overheating | 12 Jun 2005 13:35 GMT | 1 |
Ihave recently changed the thermostat in my scenic and now although the stat opens the temperature guage goes to high ht e fan comes on and then goes off,it seems as if slugs of water are coming through how do I bleed the system to get rid of any airlocks,I have disconnected the top ...
|