Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / August 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
effects of late timing ?11 Aug 2005 08:38 GMT9
I've been told that running an engine with timing too much advanced causes
damage. But what's the story with late timing ? I found very little on
usenet about late timing, except for power loss, "like an old man's car ..."
My dealer adjusted the distributor because of pinging, about ...
289 4bbl Carb11 Aug 2005 08:19 GMT9
I'd like to swap out the existing 2V Carb with a 4V on my 67 289
Fastback. I realize that i will have to get a 4V Intake - which im
already in teh process of.
Im not out to race, im simply trying to get just that little bit of HP
Honda Electrical Quandry11 Aug 2005 05:29 GMT3
  Multipart question, but first, the obligatory: 1997 Honda Accord LX,
two Door, 115k miles.
  Driver side window lift motor and regulator tore themselves apart
when a cable decided to twist up.  After replacing I noticed a number of
FUTURE PRIDICTIONS - STOCKS - PRODUCTS - FUTURE GLOBAL MARKET10 Aug 2005 21:43 GMT1
FUTURE PRIDICTIONS - STOCKS - PRODUCTS - FUTURE GLOBAL MARKET
TOP SELLING CHRISMAS PURCHASE IF ADVERTISE MAKES A GREAT GIFT !!!!
DVD'S
X-FM AND SIRIUS RADIO
priming the oil pump10 Aug 2005 21:25 GMT4
So I had to replace my crank-mounted oil pump.  The replacement pump is sealed
into the housing, so I can't "pack the gears with vaseline" as the teardown
manual says.  What's the best way to avoid a dry start and/or test the oiling
system before attempting to start?  Turn motor ...
Advice on the Mazda 610 Aug 2005 16:19 GMT2
I am looking to buy a used Mazda6 2003 or 2004 from a dealership
(probably certified if there isn't too much of a price difference).
Can someone who owns the car or knows about it comment on it?  How is
it compared to the Honda Accord, the Camry or the Altima?
FS: SPARE WHEEL+TIRE, NEW $25-30, from Nissan 15"model, fits other10 Aug 2005 16:07 GMT1
Posted on Ebay, item# 7991538770.  Goto www.ebay.com and enter "7991538770"
(without quotation marks) into search window (or item#, etc.); BUY NOW
OPTION is AVAILABLE, i.e. NO need to wait for Auction end - buynow set to
$30.  Please read descr. there, but a few facts I mention ...
Buy new car or certified used car10 Aug 2005 15:35 GMT9
I wonder whether to buy a new car or buy a certified used car. which
choice is more sound and economic?
Thanks,
Rick
Stalling on a '89 Cutlas Cierra 2.5 Tech 410 Aug 2005 10:18 GMT4
I had a bad control module on my '89 cierra 2.5L Tech 4 motor. It was
recommended that I also replace the crankshaft sensor as well since
it's located under the coil pack & control module. So I had the module
& crank sensor replaced. I get in and it starts right up. I put it in
energy conserving oil10 Aug 2005 05:47 GMT17
If I had ever seen the words "energy conserving" oil before I assumed it was a
meaningless marketing slogan.  However, my VW Golf owner's manual makes a big
distinction between energy conserving 10w-30 and multi-grade 10w-30.  According
to the manual, multi-grade should only be used ...
94 Honda Accord A/C problem10 Aug 2005 04:18 GMT2
My 94 Honda Accord A/C make noise when I turn it on and the idle speed
drop from 700 to about 400-500, sometimes when I stop at a stop light
the engine will stop runing. The compressor make some loud sound (noise
louder than before). It was checked by Honda dealer, A/C leaks 134a,
brake pads rubbing against disc when brakes are not applied10 Aug 2005 03:43 GMT5
hi, i have a less than 3 yr old 2003 nissan altima. it has about 20k
miles in it and already the brake pads have worn out so much so that
the brake metal touched the disk rotor. had to replace disk rotors for
the rear wheels. spent about $500.
weird Electrical / Alternator problem 93 infiniti g2010 Aug 2005 01:37 GMT1
My car recently stalled due to low battery... which caught me by
surprise because the batt light was NOT on at this point.   I opened up
the hood and noticed one of the wires on the Field current connector to
the alternator was broken off.  This probably happened while I was
Ford no-run problem10 Aug 2005 00:36 GMT6
This is a cute one given to me by my co-worker.  Now, I could swear that
this model car should have an OBD-II, but he says he is only getting a
single digit error code out of it, and that code is 8.
As you can see, he has got the car to the point where it will start up
1990 Saab 900 Brakes09 Aug 2005 22:57 GMT2
My brother-in-law just picked up a 1990 Saab 900 which runs well and
has fairly low mileage.  However, it has some issues with the brakes
that he asked me to look at since I'm considerably more car savvy than
him (I probably would have passed on this car, low price or not, if
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 July, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.