| Thread | Last Post | Replies |
|
| Parking Brake verses tranny's Park? | 18 Aug 2005 01:27 GMT | 14 |
Mechanic told me to never use the parking brake unless I like warped and grabbing brakes. Said just to use the Park on the trans. selector. He said, aside from improperly torqued wheels, that the parking brake applies to much localized heat to the drum or disk and creates a hard ...
|
| Tips and advice needed for brake work on '97 K3500 DRW... | 18 Aug 2005 00:42 GMT | 23 |
Tomorrow I will be starting (and hopefully finishing) a full brake job on my '97 K3500 DRW Pickup (crew cab), 141k miles. I've hopefully got all the parts I may need: New pads for the front
|
| 94 Cutlass Supreme - whistles while driving | 18 Aug 2005 00:27 GMT | 11 |
I'm getting a whistling sound when driving in my '94 Cutlass with the 3100 V6. It sounds like an air leak and I just can't find it. I've pushed and pulled on every air hose I can find with no results. The whistling seems to happen only when there's no throttle input after ...
|
| Antitheft deterrent (ATD) module for 90's Reatta and Riviera | 17 Aug 2005 23:31 GMT | 1 |
Is there anyone here who knows how this module really functions? Passkey detector apparently activates this module which, when in protective mode, disables the starter solenoid function and also disables starting fuel
|
| can mix different types of windsheild washer fluids? | 17 Aug 2005 16:15 GMT | 2 |
Could be a silly question : Can we just top up the windshield washer reservoir with any type of washer fluid, regardless what's currently in there? In summer Wal-Mart sells the type of washer good for removing bug bodies, in winter people mostly use
|
| minimum rotor thickness | 17 Aug 2005 11:48 GMT | 1 |
Rear brakes: Minimum is .315 and mine are .300 What are the risks of just changing the pads given that rear brakes take on a small portion of the load?
|
| I own Toyota Tacoma LX 1996, does it sound like solenoid problem? | 17 Aug 2005 07:13 GMT | 5 |
I own Toyota Tacoma LX 1996. The car has a problem. After driving about 20 miles, wnen stopped; car would not start again. I would have to wait for a while.
|
| Crankshaft damper / pulley bolt | 17 Aug 2005 07:04 GMT | 10 |
To get the crankshaft bolt loose on my Toyota pickup: Get two sturdy pieces of angle iron long enough to fit from your crankshaft bolt to the ground at a 45 degree angle (about 30" on my Toyota 4wd 3.0 V6 pickup). I used a piece of old bed frame cut with my skill saw and a $2
|
| Intermittent drivability problem due to fretting corrosion -- a case study | 17 Aug 2005 06:45 GMT | 4 |
I'm posting this information in case you may run across a similar problem. PROBLEM 1998 Cadillac DeVille with Northstar control system and with intermittent MIL, sometimes flashing. Vehicle was taken to dealership
|
| GMC 3500 Savanna -running rough after fuel pump change | 16 Aug 2005 22:56 GMT | 3 |
Hello all.. 2000 savanna I have is running like crap since I changed the in-tank fuel pump... all lines are correct and now the check engine light is on...What the heck did I do wrong?.....please help......... thanks---3500...5.7fi...4spd trans
|
| FS: SPARE WHEEL+TIRE, NEW $24, from Nissan 15"model, fits other | 16 Aug 2005 22:04 GMT | 4 |
Posted on Ebay, item# 7991538770. Goto www.ebay.com and enter "7991538770" (without quotation marks) into search window (or item#, etc.); BUY NOW OPTION is AVAILABLE, i.e. NO need to wait for Auction end - buynow set to $25. Please read descr. there, but a few facts I mention ...
|
| oil pump came with gasket? | 16 Aug 2005 21:42 GMT | 23 |
Ok, I just got my new crank-mounted oil pump. It came with a blue paper gasket instead of the factory o-rings (no gasket came off the old pump). The gasket goes all around the pump and also covers the o-ring slots around the oil passages.
|
| GMC 3500 Savanna -running rough after fuel pump change | 16 Aug 2005 21:42 GMT | 2 |
Hello all.. 2000 savanna I have is running like crap since I changed the in-tank fuel pump... all lines are correct and now the check engine light is on...What the heck did I do wrong?.....please help......... thanks---3500...5.7fi...4spd trans
|
| 1980 ford hard no start | 16 Aug 2005 21:27 GMT | 2 |
Cannot start unless I pour 1-2 oz of gas down the carb, then it idles and drives ok but will not restart after turning off. Choke fully opens from almost closed as engine is warmed up. This problem just started with no prior symptoms.
|
| need a site for self repair. Does it exist? | 16 Aug 2005 18:39 GMT | 11 |
I am a sort of auto-enthusiast and I need to repair/experiment with my car. But I don't have a garage of course. I was wondering if there was a site where I could do things with my car. Some sort of garage for rent or free space, I don't know. Does such thing exist? I recently moved ...
|