Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / September 2005

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Re; 1987 cadillac eldorado11 Sep 2005 08:00 GMT2
Cooling fan stays on constantly. what could the problem be?
Car cover for snow advice?10 Sep 2005 22:45 GMT26
Id like to buy a car cover to cover my vehicle for
daily use in the winter.
I do not have a garage.
Any advice or thoughts on what cover to get?
Quick question abotu o rings09 Sep 2005 23:55 GMT3
I had the radiator repaired on this 96 chevy. It has an oil cooler
built into the radiator. O noticed the lines had o rings on them where
they go into the radiator. There was nothing left of the o rings but it
looked like they were green. How can I tell what the proper size o
Pressing gas while braking - is that ok?09 Sep 2005 23:03 GMT8
My car (2001 Chev Impala) makes a kind of hissing noise while accelerating
(together with loss of acceleration power and worse gas mileage). It's
getting louder and louder. Many advices from the groups suggest it must be
from Catalytic Converter. But my dealer says it's not the ...
Elantra accident repair09 Sep 2005 20:00 GMT2
My niece had an accident and managed to bend the passenger side front wheel
into the wheel well. Just enough so that the wheel will not rotate. I
jacked the front end up and had a look. The driver's side wheel will
rotate freely while in neutral. The passenger's side wheel barely ...
95 Neon Brake Flex Hose09 Sep 2005 16:52 GMT4
Local auto store has none
in stock or in there depot,dealership
wants more then I paid for
a brand new caliper, does anyone no if there is another vehicle that I
Brake Caliper09 Sep 2005 15:29 GMT4
Seems my driver side front brakes are always on, doesnt lock up but heats
up the rotor and rim, has a burning smell also. Repalced pads and the
caliper, still seems to have the same problem. Could the master cylindar
be the problem
2-Post Lift09 Sep 2005 10:57 GMT16
I am thinking about getting a 2-post lift and the biggest concern is
safety.
I currently have my cars jacked on 4 jack stands.
Does anyone have any insight into the pros/cons from a safety
need repair manual /95 Infinity J30/how do i drain the radiator? 09 Sep 2005 09:48 GMT14
i am a single female who must do my own auto repairs.i need this info asap!
i need to drain the radiator and the entire cooling system so i can get the
timing belt cover off. please help !
Overheating09 Sep 2005 00:36 GMT14
This summer I've noticed something that hasn't happened to my car before
 (98 Grand Am SE)
When it's very hot (say above 80) and sunny out, I'm running the A/C,
and I'm not moving quickly (ie, city traffic), the temperature needle
Need Help:  '97 MPV won't charge. Has new battery and alternator, so what next??? TIA !09 Sep 2005 00:00 GMT4
I accidently hit send before finishing the original post.
Need some help with my MPV.
In a nutshell, the charging system is not working.  Hooking a
volt meter up to the battery at idle shows about 13-14 volts at
Autozone engines08 Sep 2005 23:22 GMT37
Are autozone engines very good? Can you expect them to last 100,000
miles?
Free $1800 Gas for a Year!!08 Sep 2005 14:55 GMT1
Free $1800 Gas for a Year!!
Link
Why does reverse gear make a higher pitched noise?08 Sep 2005 12:47 GMT7
I've always wondered this.  At one point I'm sure it was explained to
me, but I've since forgotten the reason.
Whether manual or automatic transmission, cars in reverse seem to make
a much higher pitched whir (almost electric sounding) than when in
source for stainless steel 2.5" to 2.25" reducer08 Sep 2005 12:43 GMT2
I'm fitting a muffler to my motorcycle, and I need a reducer tube that
is 2.25" ID on one end and 2.5" OD on the other end.  Who would be able
to supply one of those?
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 August, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.