how hard is it to change out the injection module.   i havnt been under the
hood in a few weeks, and i dont have a manual handy... do i have to remove
the complete intake manifold?

Looking for 95 Neon 2 door, sport -
need a engine.  DOHC will take SOHC
call 488-8232
Thanks

By any chance, does anybody know the wheel offset (or wheel backspace)
specification for OEM black steel wheels on a 1998 Saturn SW2? I know
that they are 15" diameter, 6" wide rims with a 4x100 lug pattern, but I
can't find the offset anywhere on the 'Net.

starting tonite at 9:45 EST PM
http://search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZ66fourdoor
Ford nine inch rear
power window motors, cranks, and switches for door windows

Those things have like 150 ft lbs of torque on them; I've always used
the hillbilly method of putting a breaker bar on the bolt, and cranking
the engine. (taking the usual precautions, of course)
Most junkyard cars don't have batteries and rarely seem to have starters.

my son has a 90 beretta gtz with an after market sway bar. the shop he took
it to said they had to cut the stabilizers to replace with new ones.now the
steering is harder than before and when the wheel is turned there is a loud
squeak.I think it may just be the power steering motor, ...

Heya, working on a 1995 Ford E250 cargo van 4.9L L6 with 176k miles.  The
fuel filter looks like it hasn't been replaced since it came off the
production line..  My old '93 Taurus had those easy to remove plastic clips
that secured the fuel line to the filter.  The lines on this van ...

I hope this isn't too far off subject. I'm wondering if there is any
way to get part of a broken key out of a key hole in my car.
And on that note, does anyone make keys out of something that doesn't
break so easily?

I unplugged my battery completely, and put it on my garage
floor. But my voltmeter still shows +4V from my car chassis to
the +ve terminal, and 3V from the -ve terminal to the car
chassis. In fact it shows various voltages to random other

The power seat and power locks stopped working on my
1995 Taurus.  Both, plus the electric windows, use the
same breaker.  But the windows work so it can't be the
breaker.  Both stopped working at the same time.  My

   My 2000 Lincoln Town Car wheel rim exploded on the interstate last
night.
Blew out a half dollar size hole in the middle of the tread area of the rim.
This was in Bronx NY on 95.

I need Help.
I have a 96 Buick Riviera 3.8 Liter.
I am trying to remove the power steering pump
pulley.

have an 85' chevy S10, with V-6 2.8L...when i run down the highway for a
while, after some time, the temp gauge sometimes starts to creep higher and
higher eventually leveling off near the high temp zone, and sometimes it
just stays right in the middle...

The driver's side power seat on my 1995 Ford Crown Vic won't go
forward. It will go backward, but not forward.  There is no obstruction
under the seat.  Is this just a motor problem?

For quite a while, I've had an oil leak from the driver-side valve
cover.  I've replaced the gasket once or twice, and I thought I did it
right, but the oil still gets onto the exhaust manifold and smokes and
stinks.  It seems to be much worse when there is load on the engine,