I just had the key break off in the trunk lock of my 1989 Corolla. The
same key is used for the ignition,doors, and trunk so I am hoping I can
have the broken piece removed from the lock.  The lock appears to be
fairly easy to remove.  If I removed it, can I take it somewhere and

I have a 95 buick skylark and when u start it up the motor jumps reel bad
its a qual 4 engine and when u drive it runs fine

The deal is I am an independent contractor without portfolio, that is,
  55 yrs. old w/15 yrs experience one man automotive shop.
Machinist by trade.
   Hiring out as mechanic to a used car/body shop/garage/,

Someone has given me a 1991 Isuzu pickup with the 2.3L 4 cyl. engine.  The
engine runs (barely), but is not firing on cylinders 1 and 2.  I can crank
it, and pull both plug wires on 1 and 2 with no difference in it's running.  
Compression tests show 150 on cyl 4, 120 on cyl 3, ...

I got a GrandAM that gets hot but will cool down after you rev up the
engine while in nutral, heater doesnt work had head gasket work done on
it, new water pump,thermostat, raiditor flushed, thought it had air lock
had fluids pumped thoughout the engine at chevy dealer and still ...

After my car has warmed up, and idles around 750 rpm, and I come to a full
stop, the idle is smooth for 10 seconds. Then the engine stumbles, the idle
dips down to 250 rpm for 2 seconds, almost stalls, then the idle goes back up
to 750 rpm. I have new spark plugs, spark plug ...

"RICH WITH PAYPAL IN DAYS"
Do you want to be rich as soon as possible? Please read this-
A little while back I was browsing through a news group, just like you
are now and came across an article similar to this that claimed you

I have a 1990 Chevy one ton HD (G30) type van. The dealer tells me that
going by my VIN number I have a turbo 400 transmission without
overdrive in it. Last week my son loaded about 2000 lbs into it and
drove ten miles. He says it was running ok just afterwards but two days

I am going to replace my old torque wrench, am considering SK and was
wondering of a flex head model is worth the premium on price, e.g. an
SK 74251 1/2" 25-250 ft-lbs retails for about $83 and an SK 74256 flex
head 1/2" 25-250 ft-lbs retails for about $137. It may be that other

My abs light is on in my Acura Legend.
Is this just a remove and replace sensor kind of thing?
Mike

       I've had a problem for the past 3 years and it's gotten worse
as the time has gone on. It's a 1997 Buick Riviera 3.8 supercharged
engine. Two problems are it will just stall while sitting at a red
light (sometimes it catches itself though) and second, at around 160

I have heard that you should keep your fuel tank as full as possible,
to reduce the exposed surface on the interior of the tank, on which
condensation (ie. water) can form.
Is there any truth to this?

I picked up a '92 Geo Metro 5 spd (cheap) that had been partially stripped.
It seemed like a simple matter to "Put Humpty Dumpty" together again since
there seem to be plenty in the wrecking yards.
This was true until it came to the ECM computer. I have no idea which

I have a question that covers both technical automotive and legal issues.
Here's the scenario.
In a public high school, there are a bunch of kids obsessed with underground
racing videos they see on the internet.  A kid tells me he *wants* to get