I know this one person who work in the city, so he regularly replaces his
battery, alternator, and starter every year or so, before they need to be
replaced, just so he never breaks down. He says he has to drive through some
very dangerous neighborhoods.

The engine is in an 1990 Isuzu Trooper II.
Removed all the hydralic lifters to track down the clattering noise,
and found the culprit. It was only one bad lifter out of twelve. The
others look perfect. The push rods look straight, and the rocker arms

         I posted earlkier about replacing outer tie rods on my 85
Chevy Caprice.  I finally got the stud out of the control arm(?)  on
the passenger side, by using a "puller" tool.
    "Hooray" I thought, "Now the hard part is over, and all I have to

I'm considering the purchase of a '90 Jeep Cherokee.  The vehicle has a
blown ABS pump.  About how much will the replacement of that run me?
Thanks

My girlfriend's family has a Buick LeSabre. Vehicle starts up, system
checks okay (various lights in cluster, such as service engine - ABS -
traction - etc. shut off as they are supposed to shortly after car is
running). However, I rode with him for about 5 miles and the ABS system

hello on my 1998 dodge stratus with the v6 i'm having an idle problem.
sometimes once the car warms up it will idle around 750rpm and other times
it stays around 1500rpm
i checked the iac motor off the car with the electrical connector on it and

I'm in the market for a full size PU and considering a Ford F-150, inline 6,
automatic w/OD..
I presently have a '88 S-10 2.8L 5spd and tow a single axle equipment
trailer for my import tractor and equipment. The truck has nearly 200,000

Are these things still being made right now? Over the years there were
several production runs, often by  the militia-goofball contingent.

Salutations:
http://search.ebay.ca/_W0QQsassZcrappalooza
Well - the time has finally come to pass along the collection. I am not ever going to fit into several of the models and can't justify  most of the others on the home front. Would love see them find good  homes.
BMW, Renault, ...

I need to replace the voltmeter and oil pressure gagues in my '85 CJ-7,
and don't want to order up the wrong gauges.  I meaure the cutout to be
2", and lots of gauges are spec'd. out as either 2" or 2 1/16".  Are
they the same thing?  does the 2 1/6" size add in the bezel, therefore

I often have to lift large logs (2' round oaks, 2' long) into the back
of my land rover. Currently I step them up on progressively taller
logs, but it would be great if I had a platform that I could lower to
the ground, and then lever up to the height of my cargo load! Any

A professional mechanic once posted in another forum that if your car is
well maintained by a competent mechanic who maintains his education, it
should NEVER break down without warning, leaving you stranded.
Is this statement true?

Anything that will remove the musty/moldy/wet basement smell from the
heater/AC?  1994 Sentra.
Thanks,
Rick

Is this clip for real or is it just skillful editing? It looks genuine,
but surely it can't be that easy to deploy an airbag.
http://members.roadfly.com/ulf/dont_honk_at_old_ladies.wmv
Ulf

I have a Daewoo Leganza SX and my fuel gage reads full when my lights are
off but when I turn my lights on it drops down to empty. I kept it at
3/4full at all times it never got lower then that. What could make it do
that?