I went to the Ford dealer today to look at the new Ford Fusion.
Reading the window sticker revealed that the car was built with 30%
parts sourced from Canada and  the USA.  The Transmisson was made in
Japan and the car was built in Hermasillo Mexico,

I have a 1985 Corolla SR5, 217,000 miles. Car runs well, no problems. I
put a pair of auxiliary driving lights on it and use them primarily
during the day as DRLs because I have the pop-up headlights. However,
they do help a lot at night too, but was concerned that I would be

I have a 1995 Jeep  wrangler, the washer motor, I thought burned out, but
it wasn't. I test for power on the wires and I get the 12 volts needed.
when I put on the new motor it doesn't handle the load for some reason,
and the motor doesn't work. I take off the connectors and test ...

I will eventually need to replace the converter in my 2000 Accord with
the 23A4 engine, which is a ULEV model. The car has 145,000 miles on it,
and the media is coming apart inside and rattling. Searching the online
parts sources, converters for the standard motor are readily ...

I have a 1991 Oldsmobile Cutlass Ciera(with 85k) when  going from 3rd
to 2nd it will make a "clunk"  Not so much that it jerks the car around
but you can feel it a little and hear it. It happens at 20mph every
time.

... my GM shop manual specifies a torque of 13 lb. ft. for the oil filer.
But for the last 25 oil changes I have done, I have never torqued the
filter. I just simply screwed it on 3/4 to 1 full turn after the gasket made
contact with the mating surface.

I need to drain the tank on my 93 Ford Ranger so I can repair a crack in
it (or try to repair it, anyway). It has no drain plug and I haven't had
much luck siphoning the gas out. It's a bit less than half full, about
10 gals. Any ideas how to drain it? Can I open the fuel line ...

When I turn my key on (but don't crank the engine), I get a 5-second
whistling noise from my fuel pump. (At least that's what I assume the
noise is coming from, it's in the right area and I don't know what else
might make the noise). The noise resumes when the engine starts

I've got a 1971 Ford LTD Convertible.  These cars have eight 1157 style
bulbs in the rear to give full width tail and brake lights.   That's a LOT
of current going through 30+ year old wiring, switches, and corroded sockets
when you hit the brakes.

Hi I have a 4L60E of a 94 Chevy with no drive at all ranges.
Before this happened, there seem to be some problem with downshifting,
and I had to manually shift it to lower gears in order to get a good
acceleration from a stop. This had been going on for about a month or

After enjoying my Dodge Custom Van for several years, suddenly the air
conditioner packed it in
I haven't had time to check it out yet, but maybe those with considerable
experience can serve

We, Nanjing Dongyu Auto Group Import & Export Company Limited
(http://www.ndy-vehicle.com), was established and held by Nanjing
Dongyu Auto Group Co., Ltd. which possesses 4 vehicle production bases
and 5 auto accessory factories, it mainly specialize in medium

Does anyone have the instructions for replacing the complete headlight
assembly on this car. I have the part but no instructions for
installation.

I need to replace both tie rod ends on my 85 chevy caprice. It looks
like there will be no load on the tie rods and I can just crawl under
the car and take them off without anything self-destructing.  Do I need
to jack the car up?

"Inherited" my father-in-law's old truck.  He bought himself a new one
and we got a great deal as long as we let him borrow it to haul
firewood.  We bug him because this truck was a real work truck and now
his new truck is too nice to get dirty. :)