I have a Ford Festiva with a carburetted 1.3L engine. The engine needs
a carb producing about 140 CFM to run it. I have no idea what the CFM
the stock carburettor is rated for, but it runs the 1.3L engine fine.
My plans are to replace the engine with a 1.6L engine that normally

The check engine light came on in my 2001 Dodge Grand Caravan.  I took
it into the shop today (it's under a third-party warranty), and was
told the "Transmission Control Module" was bad.

What is "Speed sensitive power assisted steering"(ssps)? And how do I use
the feature, and not use the feature? Or is it automatically activated?

need help with the timing procedures. Timing marks etc.

trying to see if anyone is familiar with this problem ?
the original radio (Delco) is stuck in station scan mode ?
yes, scan is off, there is a little SC in display that goes on and off when
you cycle the scan button but radio still scans

We just had the front passenger side tie rod break on our 99 Chevy
Venture. There are only 66K km on it -- isn't that kind of soon? Haven't
hit anything.

my 89 chevy corsica has loose cylinoid how dangerous is this

I have a brief question that a person familiar with auto body work
might be able to help with. I just bought an aftermarket fiberglass
spoiler to fit my car and, to my surprise, it has no mounting holes to
fasten it to the trunk lid.

I need to replace the #1 coil pack. I have bought the part but do not know
which one is #1. Someone please advise. thank you

Call me an idiot as I've been kicking myself all day. I know this is an auto
group but I've gotten great advice on here before and I'm hoping some
masterwrencher will know about mowers as well...
This morning I went to use my riding craftsman mower and put about a half

   I have a 2003 Sonoma, essentially same as Chev S10, king cab, 2wd, v-6 &
loaded,  & wish to lower the front 2 inches and rear 3 inches.
   Re: the front, what lowering method maintains the best ride quality?
And if only dropping 2 inches, do I need to replace the shocks?  ...

Have a look at this free searchable online automotive encyclopedia.
http://www.cdxetextbook.com
It contains heaps of information, pictures and videos.

I have a 1989 Mazda 626 with 251K miles (and going strong). The clutch
is fairly new with only 41K miles on it. Last week the clutch pedal
started losing it's freeplay and now it barely has any left. It's
sometimes hard to get into gear, particularly 1st and 2nd, as I really

I bought a 95 grand prix a few months ago and only recently started
trying out the remote start. It had been previously installed so I have
no idea what all went into it other than the fact that it's Command
Start brand. I also have no idea if it ever worked in the first place.

I got a 1989 Buick park avenue at auction this summer. Runs fine. Had
problem with intermittant check engine light but that was cleared after
running for a couple of weeks.
engine is 3.8 l v6 SFI.