I am currently dealing with a VW Phaeton engine V8 4.2L which uses two
seperate air flow meters and I want to use only one air flow meter.
Somebody out there who can provide me with some information about air
flow meters and if I can divide the signal of one large air flow meter

Automotive Repair Directory - You name it, they got it. Great resource!
http://www.allworldautomotive.com/links/automotive_repair_and_service_3733.html
Automotive Repair Message Forums
http://www.allworldautomotive.com/forums/

I just installed a pair of driving lights on my '99 Accord and wanted
to wire them to come on with my highbeams. I spliced into one of the
leads for one of the highbeam bulbs and used that as the trigger for a
relay. Problem is, the driving lights come on with my low beams. What

4 cyl. 93 Nissan Altima, no fuel in carb. fuel is getting to engine,
leaking down underneath dripping gas from exhaust under the engine itself?
Have tried nothing yet, except to start with starting fluid, wouldn't
work..... The car was sluggish and had no take off right before it ...

I have a 2000 buick lesabre, 3.8 v6 f.w.d. with 52500 miles.. I got it
last year. I have the oil changed on schedule, but have not had anything
else drained/replaced so would it be a good idea to have the rest of the
engine fluids changed? ie' brake, radiator etc. or is this just a ...

I've got a situation without the expertise or money to handle it.
I have a 1995 Mazda 626 that I haven't driven in over a year.  It was
given to me, so the investment was zero.  Before I started having
problems, it ran fairly well but was cutting out... I'd had a tune up

A recent article I read had the author stating that the burning of
ethanol creates significantly less CO2 than the burning of gasoline.
This surprises me.  I know it produces less CO, but it seems to me that
it should not produce that much less CO2.

Hi;
I have a 1972 Riviera with a 455 cid engine. I would like to put
aftermarket fuel injection in it to increase drivability. Please
provide what kits I would need, and any info on the subject.

This is a 1970 Cutlass that originally had a 2 bbl carb so  I assume it is a
TH350 tranny.  Have fluid dripping from the back end of tranny but after
wiping everthing dry, it is dripping from the inside of the U-joint, between
the yoke and the cross if I am describing this right ...

Got a 66 mustang with a rebuilt 289 and a holley carb.  A few weeks
ago, I experienced a weird problem where, when I accelerated, the car
started to stutter.  I had about 25% the power I should have due to the
stuttering.  It would run smooth when just driving, but whenever I

please explain me the various prolems that are faced in 90 degree 16
cylinder v engine used in
railways. please explain me in detail two t0 three points. hoping for
ur reply soon.

I recently aquired a 1985 BMW 318i.  It will not idle properly.  When
the engine is not in gear and moving, the engine will jump constantly
between 900 and 1100 RPMs while idling. Everything else seems to be
running properly.  Someone told me that the idle control unit needs to

I recently aquired a 1985 BMW 318i.  It will not idle properly.  When
the engine is not in gear and moving, the engine will jump constantly
between 900 and 1100 RPMs while idling. Everything else seems to be
running properly.  Someone told me that the idle control unit needs to

I purchased this car about a year ago after it had been sitting in
impound. I have had consistent problems such as the battery draining
when the car is not used for more than a day, the engine fuse
occasionally snaps disabling the alternator, and sometimes the car

My 1999 Nissan Altima power steering pump is whining and it smells like
something is burning.  I have a new pump on order and it will arrive in
about 5 days.  The idler bearing also went out last week and I had a
mechanic replace the idler bearing, but not the power steering pump.  ...