I'm currently designing a racing wheel chassis that contains a racing
seat, force feedback wheel, and gas/brake pedals. I plan on adding a
device that uses the audio feed from a PC or console system to move a
motor that attaches to the seat or other part of the unit and vibrate

My brother's car has a strange proble.
Here's his description:
Driving around town speeds, the engine will start running rough, the low
coolant level light comes on, and the check engine light comes on also.

Many people said GM's 3.8 V6 is the only V6 trustworthy. I could not find
3.8 in Grand AM line. Where is it used? in Malibu, which I feel is a bad
designed car. All good reviews on Malibu are faked from GM.

Looking for rims for a 1995 Mazda Millenia and wonder what other
vehicles will fit? Many thanks.

I have an 85 Chevy S10 Pickup and the emergency brake does not work.
Can anyone tell me how to adjust the emergency brake, or at least point
me in the right direction?
Thanks!

Thinking of going into an Auto Tech course to prepare for the ASE
certification.  Can anyone tell me if it will be possible to find a
job just out of school?  I'm thinking it will be difficult and don't
want to just end up with a debt and no job.

I was driving today and all of a sudden my oil pressure indicator went
below the L. After a couple mins I could hear the valve train clicking.
Stopping my oil level was ok, my temp ind ok, not burning any oil.
When I start it back up I have oil pressure, but after about a mile, it

Currently I have 17" x 7.5" rims, and 235/45/17 tyres on the rear
and 215/45/17 on the front. (I wanted 235 all round, but there was
not enough clearance between the tyre and the strut tower on
the front).

Can anyone help me finding some wiring diagrams for a 92 buick?

  I've read pro and con about using kerosene to desludge oil pans and
oil pickup screens.  If I were to do it, I would drain the oil, remove
filter, pour just 2 quarts of kerosene into the oil filling hole, and
let the kerosene cover the oil pickup for a few hours to dissolve any

I have a 1998 Contour that won't start.  When I turn the ignition, I
hear a clicking and all electrics work.  I also have a full tank of gas.
 But it seems as fuel is not getting to the engine.   Advice?  Get a tow?
TIA,

My car has floating calipers. How easy should it be to slide them
in and out? I need to apply a fair amount of force with both hands
to move it (after unbolting the caliper from the hub).
I used to have one of the sliders seized; about 6 months ago I

Don't bother trying to get your money back from Paypal when a deal goes
bad.  Might be better to use your credit card if you can, credit card
cos. usually stand up for you.  Paypal basically told me that I had to
have a letter from an "expert" testifying to the condition etc. of ...

i have a rover214sli the rev counter displays between 1000-2000 revs when
idle can anyone tell me what the problem may be or how to adjust please

As I posted earlier, I think I will be tearing down the engine in my
'55 Stude soon, not because there's any problem with the way it runs or
oil pressure, but because it leaks far more oil than it burns and also
because my friend has a steam cleaner/pressure washer that he's itching