Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / March 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Brake manifold vacuum hose16 Mar 2006 01:19 GMT1
Car is a 1989 Honda CRX Si with MPFI.
Is the brake booster vacuum line a special type of hose or can I
substitute one from the Napa reel that fits?
1991 Pontiac sunbird starter.15 Mar 2006 18:11 GMT2
My daughters 1991 sunbird either 3.1 or 3.3 engine is in the snow and
needs starter replaced. I need to crawl under the engine and replace
it, looks like very poor access. Advice on how to please. jesse
Toyota15 Mar 2006 17:57 GMT2
I have a 1996 toyota tacoma sometimes when you push the clutch in it
makes a really bad noise but not everytime it dosent sound like it
coming from the throw out bearing it sounds like its coming from around
the starter thanks.
Power Steering Fluid   vs  Slick 50?15 Mar 2006 16:37 GMT14
is it possible to substitute  power steering fluid for a synthetic brand oil
additive e.g., slick 50, prolong, duralube?
                                         Larry Von
1985 Ford Bronco II melted hoses15 Mar 2006 06:41 GMT2
I was driving home today, 25 miles, and noticed an exhaust leak coming
from under the hood.  When I got home and looked, there was a wad of
melted hoses on the passenger side of the engine.  No exhaust manifold
leak I can find, just a noise coming from a hose that goes to the
Royal Purple Synthetic Oil15 Mar 2006 06:05 GMT5
I'm thinking of getting a mini-case of it for trial. It's advertising
hype sounds good, anyone here ever used it?
What do you think about it?
m h o
92 acclaim check engine light goes on and off15 Mar 2006 05:09 GMT10
My wife's 1992 plymouth acclaim's check engine light goes on whenever
the radio or heater is turned on.  When the radio or heater is turned
off the check engine light goes out as well.
Should I be looking for a new alternator? or should I be looking
toyota relays ?15 Mar 2006 02:38 GMT4
i am not undertsanding how to check to see if the relay is bad or good .
my cooling fans will not work when the relays are pressed in all the way
the fans will not work . but if i pull them half way out and wiggle them
a bit i can get the fans working. i am not sure if this is a ...
5w30 vs 10w30 wt. oil15 Mar 2006 00:07 GMT27
if your car calls for the 5w30 weight oil, would you hesitate to use the
10w30 in a climate with temps of 32 - 100°?
I can't make myself believe that the recommendation of the motor car co.
- isn't self-serving.
1991 Honda Civic14 Mar 2006 21:14 GMT2
Hey guys, ok i have a 1991 Honda Civic I installed lowering springs on
it and well now the vehicle is leaning to the side (left) i checked and
replaced left font strut and checked and it stil leaning what you think
it could be guys help me out thanks....
screeching sound14 Mar 2006 21:13 GMT3
coming from the left fender well of an '05 Dodge Stratus sedan. What in
the world could that - be?
m h o
 v ƒe
Clutch Does Not 'Return' - what would cause this?14 Mar 2006 20:10 GMT5
'92 Nissan 240SX 140K mi, 4 cyl, put new Beck Arnley clutch in including disk, bearing and pressure plate about 2 years
ago. Also put new master cyl in about that time.
Couple weeks ago it went to the floor and sat there. I can flick the pedal with my foot and it comes up. Then it ...
clear coat14 Mar 2006 19:46 GMT4
I recently painted my motorcycle. After applying the clearcoat I noticed
particles in the clearcoatfinish. Can I sand the clearcoat smooth and
recoat.
92 V6 Camery heat sensor14 Mar 2006 19:14 GMT2
The heat indicator in my 92 V6 camry does not work. The dial doesn't
move. Where is the sensor plug located? I suspect that is the problem.
Or do you have a different suggestion?
Thanks,
anyone know how to read brake lining codes?14 Mar 2006 18:26 GMT10
Still trying to figure out why my car won't stop...  rears are locking
up way before the fronts really start to work.  This is a '55
Studebaker coupe, FWIW...  see below for copy of post to
alt.autos.studebaker.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.