Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / June 2006

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Cottman Transmissions21 Jun 2006 03:14 GMT13
98 Ford Windstar Had Trans rebuilt.After 100 miles took it back to have
them check weird shifting.They pull up codes saying IMRC bad on bank
one of engine .OK They cant do anything till my regular mechanic can
fix IMRC problem.So I go and pick it up and to my dismay there is an
96 Accord rear main seal replacement21 Jun 2006 00:51 GMT1
Next month I am planning on replacing the rear main seal on my 96 Accord 2.2
w/auto trans myself.(1 qt oil leak every 800 miles). Are there any Honda
peculiar tools I should buy that I
will need to get the job done. What is involved after removing the
substuting improper lug nuts20 Jun 2006 21:40 GMT7
An elderly woman asked me to fix up her one ton Dodge (1972) van for
the road. The previous mechanic insists that the use of lug nuts used
for mag rims (very long shanks, designed to clamp to the outside of a
mag rim with DEEP holes) is 'ok' for steel rims with shallow holes.
I need help in my research.20 Jun 2006 19:59 GMT3
my name is matthew smith and i live in alberta,canada. I am 19 years
old and i am an entrepenuer-where my work has taken me is to the
automotive accesories manufacturing business. so i am now researching
the specs of all automotives between the years of 1970-2006 so that i
AC20 Jun 2006 19:48 GMT3
I have a small studio - around 650 sq feet. I try to ask about energy
economy using my central air. There are two conflicting theories
1 Theory that most people follow : keep the ac all the time - when you
leave, just increase the temperature
Tires, tyres, cauchos20 Jun 2006 18:57 GMT10
I have used Michelins for a number of years..
Never really had a beef with them.  I normally got great treadlife, good
handling,
and a quiet ride.
2001 Ford Taurus Air Conditioner20 Jun 2006 02:40 GMT3
I have a 2001 Ford Taurus that I have been very happy with until
recently.  A few weeks ago, when it first started to get hot, I turned
on my air conditioner for some relief.  The air was nice and cold for a
few minutes, then all the sudden I could tell it was no longer working,
Bearing replacement19 Jun 2006 23:22 GMT2
2001 crown vic working on rear wheel bearings
Finally I have some time to replace these bearings.  i sat down today
after reading a bit on it and absorbing information from the guys at
checker.
Just Had Drums Cut...what does this yellow dot mean?19 Jun 2006 20:44 GMT3
Im doing the rear drum brakes on a Corolla. After I got the drums back
from being
resurfaced, they put yellow dots on them. Is this some kind of
balancing mark? What is the correct relationship to place the drum back
Buick Roadmaster Low Voltage at Fuel Pump Connector19 Jun 2006 20:43 GMT3
I have a 94 Buick Roadmaster with a 5.7 engine that has developed a
progressive starting problem. At first, it would fail to start, and a
few minutes later it would. Now, it cranks but will not start. Spark is
O.K., but no fuel pressure. Checking the voltage at the connector to
Fuel Pump Location (srt)19 Jun 2006 19:26 GMT5
on a dodge '05 stratus automatic, 4-door sedan, w/2.4L engine?
and what should be the average mpg in the city?
>mho
>v fe
Removing the ECM and Running Without19 Jun 2006 15:28 GMT1
I need to know if it possible to remove an ECM from a 1983 Camaro Z28
with a 305. I would like to get rid of many of the smog controls, put a
new intake manifold, carburetor and an ignition that will operate
without the ECM.  Is this possible without any major problems?  I don't
Turn signals18 Jun 2006 20:46 GMT1
We have a 1990 Mazda MX-6.  My son was in a minor fender bender that
cracked the left turn signal lense.  Now none of the turn signals work.
All the other lights work, and when you try to signal either
direction, you can hear the clicking like it should be working, but
Totoya Corolla S mirror18 Jun 2006 18:38 GMT2
How do you remove the outside mirror?  Does the inside (plastic ) cover pop
off or do I have to remove the whole inside door panel?  Thanks.
94 Concorde (Intrepid) Defroster stuck on HIGH & HOT !18 Jun 2006 18:14 GMT4
My climate control system on 1994 Plymouth Concorde is possessed.  At times,
for no reason that I can figure out, all the lights on the climate control
console go out, the fan goes into High mode with full heat.  You can't turn
it off no matter what you do.  But give it time, ...
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 May, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.