I just bought a 93 cougar, and so far things are going wrong and I do
not know how to fix them lol. I was driving in the rain and someone
pulled over to tell me my headlights are blinking, for some reason my
radio all os a sudden stopped working, all I get is static, the drivers

I'm new to this group.  Saw a message from a couple months ago asking
for help with a carburetor problem with an 86 nova--sounded just like
the problem we're having here.  I'm wondering if the person with the
original problem (name on the post was "silver5liter") was able to

Working on my girlfriends car, just replaced the PVC valve tube because of a
vacuum leak that was causing rough idle.  My temp tape fix worked for a
while but finally wasn't doing the job anymore hence the permanent fix.
After the replacement she's still idling really bad.  Press ...

I have a 10 year old john deere sx38 lawn tractor. Over the last year
intermittantly the blade clutch has become disengaged suddenly while
cutting the lawn. When I try to reengage the blade nothing happens. The
engine keeps running it is just the blade that becomes disengaged. Then

I have a 305 engine in a 1983 Camaro.  I purchased the car and the plug
wires were not attached to the plugs or distributer. Does the length of
each wire matter, or can I use the longest wire for 1 and 2 cylinder
and etc...  I am not sure what to do.

Hello guys...I'm hoping someone can help me with this horrific problem
that I'm having. I own a 1991 Chevy Lumina 3.1L V6 car. It has over
135,000 miles on it. There are a lot of parts that are new from Auto
Zone within the past few years on it, alternator, boots, etc. I've been

I made a new site for us dealership workers. Message board, live chats
and more.
http://www.DealerShipConnect.com

I have a 66 belair. I put in a fresh rebuilt 68' 350 chevy motor with
410 hp. I got it all hooked up, and i have a problem when i try to
accelarate, it feels similar to the power of my old original 283 motor.
It literally feels like im getting maybe 150ish hp. When i push the

what is a good place to purchase a couple large plastic (self-adhesive)
3M-type sheets?
am looking to create a custom sidewall design and need some large sheets
this is of course for a car :)

This is a real picture from a San Diego newspaper. A whale at Shamu
died while coming back to the ground.
http://i57.photobucket.com/albums/g234/tom_ate_a_hotdog/b535aea3.jpg

Posting car problem questions without this information is a waste of
electrons.
Engine and transmission options would be nice too!
Thank you.

Just bought a new axle shaft for my 01 crown vic, its dry, kind of
dirty, but its new.  how do i clean it and should i lube it up before
installing it?

Was planning to go out of town the other day,  and my battery in the 97
Dodge Custom Van was dead
as hell. In my haste, I checked all the interior lights, etc, and put the
charger on it overnight.

Can someone direct me to a website that shows a parts breakdown for a
Chevrolet Corsica? I had a piece come apart on the front of my car that I
believe is a linkage that makes up the "front end" and I don't know what it
is. It is about 8-10 inches long, has rubber bushings on each ...

Can someone tell me what causes the instrument panel "radiator light"
to stay on?  The car is running somewhat hotter than usual.  But it has
plenty of fluid in the system and the reservoir.
The "user manual" says that its just a "cooling system problem" and to