| Thread | Last Post | Replies |
|
| Inline Fuse For CB Power Cord | 11 Jul 2006 20:45 GMT | 11 |
Plugged in one of the CB radio's today ( in the Buick ) and the 2 amp inline fuse blew. Could this of been caused by the wires being two different sizes? The wires coming out of the lighter plug going to the fuse holder are
|
| 96 Astro/Safari - any good? Opinions Please! | 11 Jul 2006 18:19 GMT | 6 |
I am thinking about buying a used GM Safari Van. Model year is 1996, and it has about 180,000 kms. I don't know a thing about these vans. Is there any known problems? (other than the gas guzzling 4.3l engine!)
|
| Why do car manufacturers charge so much for replacement parts? | 11 Jul 2006 14:41 GMT | 17 |
Hi group: I've been considering purchasing an old Geo Metro for commuting purposes because of the good gas mileage it gets. When I looked at a 1997 Geo Metro offered for sale in my area by a
|
| 92 3.1 chevy lumina | 11 Jul 2006 12:00 GMT | 4 |
Is this my transmission ?? I can't go over 40 in drive or o/d but it does in 2nd gear. Just not sure this is a transmission problem as it ran so well. Had a bunch of wiring and other work done by a backyard type mechanic. All was well
|
| Cavalier 93 V6 3.1L fuel pump relay location | 11 Jul 2006 08:29 GMT | 2 |
My car stopped working one week ago. The most possible thing I have found is fuel pump stopped. I want to check fuel pump relay before opening the gas tank to access the fuel pump. But couldn't find the relay.
|
| The best oil change shop I ever seen | 11 Jul 2006 05:35 GMT | 17 |
I'm on the road quite often because of my job. Lately I was in the Easley, SC area. My car needed an oil change and there was a shop close to where I was working so I decided to go there. Wow! What a service. That is the best I ever had. I was shocked since all
|
| EVAP control system leak | 11 Jul 2006 04:13 GMT | 6 |
I got a 98 Honda Accord. From more than a year ago, I spell gas around the gas tank whenever I finish driving and exit. Now the check engine light is on and I find the code to be 90. My Haynes manual says it's P1456 -- 90 -- EVAP control system leak near fuel tank
|
| Cavalier 93 V6/3.1 dies 172,000KM | 11 Jul 2006 00:26 GMT | 9 |
I have my car for over 4 years. It worked perfect and never had a problem until today. I parked the car yesterday after short run and today morning I turned the key on, but it didn't start. The starter works file and I have
|
| carb spacer recommendations? | 10 Jul 2006 23:47 GMT | 9 |
I'm trying to finish up the engine for my '55 Stude coupe; it's a R1-spec (high compression) 289 that I've thrown some dress-up pieces at. One of the additions is an aluminum intake manifold. I'm planning on using an Edelbrock "Thunder Series" AVS carb on it.
|
| 96 camaro z28 AC | 10 Jul 2006 22:30 GMT | 28 |
i have a issue with my AC, it's completely charged but its not blowing out any cold air! any suggestions?
|
| URGENT >>>> "" PRESS RELEASE "" !!!!!!!! | 10 Jul 2006 22:19 GMT | 1 |
"" THE BIG OIL COMPANIES DON'T WANT YOU TO KNOW ABOUT THIS "" AMZING NEW """ NANO TECHNOLOGY """ !!!!!!!!!!!!!!!!!!!!!! http://tinyurl.com/lzmq2
|
| Adding keyless trunk release to '06 Corolla | 10 Jul 2006 19:18 GMT | 4 |
I have a 2006 Corolla LE with keyless entry, but no keyless trunk release. I can add an aftermarket solenoid to make the trunk electronically releaseable, but I was trying to figure out how to get the remote to activate the solenoid.
|
| Headlight Relay, '91 Dodge Caravan | 10 Jul 2006 19:13 GMT | 2 |
1991 Dodge Caravan, When I turn on the headlight switch, the running lights come on but not the headlights, until I pull the turn indicator up, and the high beams come on, but only if you hold it, and the lows never come on. I described the problem to the auto parts store tech and
|
| Battery terminal short | 10 Jul 2006 17:39 GMT | 7 |
While replacing my battery tonight, a pair of pliers accidently got knocked across the positive and negative battery terminals while both of the battery cables were connected to their respective battery terminals. A few sparks occured, but I managed to remove the pliers
|
| fuel sensor | 10 Jul 2006 16:28 GMT | 1 |
dear friends. need source for petrol / diesel fuel flow sensor. i am designing a controller to display fuel consumed by petrol / diesel generator sets. I am based in India.
|