| Thread | Last Post | Replies |
|
| Is This A Bad Computer Module? | 23 Jul 2006 04:27 GMT | 1 |
I went to start up my 1998 Chev Prism LSI and it immediately began acting wierd. I heard a sound like a relay clicking on/off rapidly plus the car wouldnt start. I turned off the key then tried starting again with the same results.
|
| Vacumn pump adapter | 22 Jul 2006 22:14 GMT | 5 |
I need to vacumn my R134a system, and I have a good vacumn pump, but I can't find an adapter to go from R22 to R234, does anybody make an adpter for that?
|
| Bleeding Hydraulic Roller Lifters | 22 Jul 2006 15:05 GMT | 3 |
I have a question about the roller lifters in my 96 Mitsubishi 2.4L 4 cyl SOHC engine. I just had the head and valves ground after my timing belt broke. Due to some bad information I had for timing the camshaft gear, I bent some of the intake valves during the cylinder head
|
| High HC emissions | 22 Jul 2006 08:28 GMT | 2 |
I have a 1996 Chev S10 4.3L V6 auto 2wd 104,000miles Passes smog test, but HC is at limit. In neutral at 1500rpm there is slight roughness. Runs ok, no lights or codes How do I fix the HC? Maintanance, oil changes, etc up to date
|
| car stalling when shifting to 2nd gear | 22 Jul 2006 08:27 GMT | 1 |
so i have a 2000 vw cabrio, manual transmission, and just last week it started stalling/hesitating whenever i shift up to 2nd gear. the best way i can describe this is it hesitatates/stalls. kind of like if the fuel injector's were clogged. but obviously if that was the case it
|
| how do i conect my cooling fan to a toggle? | 22 Jul 2006 07:36 GMT | 8 |
Ok here is the storie I have an 83 toyota camry and the fan wont come on, So the first thing i do is connect it directly to the battery and it worked. So my thing is how do i connect my fan to a toggle switch so i can manually turn it on and off?
|
| 94 honda accord, ignition problem | 21 Jul 2006 23:26 GMT | 9 |
recently I have encountered the following problem on my Honda Accord '94.
|Sometimes|, when I try to run the ignition it cranks, seems to start for half a second (speedometer shows
|
| Noise in front | 21 Jul 2006 19:53 GMT | 12 |
My car is a standard gear '96 Honda Civic. It has a big noise when going at low speed, especially when going up hill or making a sharp turn. The source of the sound is under the car, between front wheels and close to right wheel (probably).
|
| Need Parts????? | 21 Jul 2006 17:16 GMT | 2 |
::*Need parts?? We probably have them! We have headlights, shocks, Earls fittings, Holley performance products, K&N filters, True Flow filters, chrome accessories, Racers tape, Amsoil, Racing parts & accessories. Will ship ups or usps!!*::
|
| camshaft sensor | 21 Jul 2006 15:13 GMT | 3 |
i bought a 1995 chevy lumnia ls w/3.4motor. it ran fine all the way home from cranston r.i. to centrla falls,r.i. then it would'nt start. had it anazlized and it came back camshaft sensor,put one in and and when it starts in the monring ,it revs to 3grand then back donw to 500rpms ...
|
| Question for dealership auto techs | 21 Jul 2006 05:28 GMT | 14 |
I work at a Chevy dealership. I was pulling a monstrous SUV into a tight stall and scraped the side. I am told that I need to pay for the $600 in damages. Shouldn't the dealership have insurance for this? This is the first time I have ever done this.
|
| Challenging OBD II failure; 2 seconds missing... | 21 Jul 2006 03:36 GMT | 9 |
It's a 1997 Chevrolet Astro, 4.3L Vortec V6 When turning ignition just to on, the fuel pump runs for 2 seconds, as should. When turning off the running engine, the fuel pump does NOT keep
|
| vauxhall cavalier 1.8 fan not cutting in. | 21 Jul 2006 02:43 GMT | 5 |
Hi im new to this,can anybody help me with this problem??.I have a L reg cavalier,it drives fine but the fan just wont cut in,and when in traffic temp goes very high,once i get going again temp comes down to normal.Any help please.
|
| Tempo/Topaz front motormount / swaybar help please | 21 Jul 2006 01:50 GMT | 2 |
I am doing my first '89 Tempo/Topaz motor mount replacement. It's the one under the battery/airbox on the drivers side. I have removed the rubber part, but cannot get a good grip on the three 13mm bolts that hold the top metal half to the automatic transmission. My tools are all
|
| how to find used car in the U.S.A | 21 Jul 2006 01:21 GMT | 4 |
Hi a friend has gone from London u.k. to Georgetown in north Dakota. he wants to buy an inexpensive used small family car either Toyota, Honda or vauxwagen golf. hey that's the cars we are used to, you know. how does one go about making such a purchase in that part of the ...
|