| Thread | Last Post | Replies |
|
| automotive restoration project software? | 29 Aug 2006 22:59 GMT | 2 |
Anyone have any good recommendations for software to track automotive restoration projects? Or, a web site that has a data base to track all the bits, pieces, money and vendors relating to a car's restoration? Not too worried about cost if it is good software or a good site.
|
| Y2K vehicle? | 29 Aug 2006 22:58 GMT | 4 |
I realize Y2K didnt really amount to anything, but what car would you like to be in if a disaster scenario was unfolding and you had to travel across the country with few possessions and needed reliable transportation?
|
| Looking at a totaled out 03 Pathfined | 29 Aug 2006 22:24 GMT | 4 |
This is at a body shop down the road. It is a 03 Pathfinder LE loaded with everything. 15K miles from a town 30 miles away. This car took a hit on the driver side. It took out the left finder it did hit the wheel and took out door. I saw the pictures of the wreck. It took no
|
| clio will not start | 29 Aug 2006 22:21 GMT | 1 |
i have been away for a long weekend, my renault clio 1952 prestige was left on the drive my nieghbout rang me to say that my lights were flashing all the time.when i got back to my car ,the battery was flat.I charged the battery
|
| Mazda 626 P1131 | 29 Aug 2006 13:09 GMT | 2 |
I have a '98 Mazda 626 with 90,000 miles. Last year it coughed up a P1131 code, which I cleared. I looked for vacuum leaks, cleaned the MAF and replaced the plugs and wires. The code did not return until last week.
|
| Windshield washer, Pontiac, 1985, Stationwagon, lining up two halves | 29 Aug 2006 11:41 GMT | 6 |
I removed the front circuit board with the pump and the pump mechanism. Now when I try to put the repaired piece back over the motor and back plate I've got a real headache. The pinion that fits into the plastic rotation wheel on the front, doesn't line up properly. I made sure I
|
| Noise when turning | 29 Aug 2006 04:13 GMT | 1 |
My 97 civic is making a groaning/grinding noise when turning left pretty sharply. From what I've read, it's likely the be the outer CV joint. Anyboyd have any idea of how much money it costs to fix a failed outer CV? Also, can I keep driving the car with the CV I have now?
|
| 91 corolla ball joints | 29 Aug 2006 00:04 GMT | 3 |
I recently took my 91 corolla to get the suspension checked out after hearing a popping noise while driving straight that I pinned down to something connected to the front driver's side strut. (creaking/popping while letting my weight off the fender)
|
| 5 Speed synchronizer question | 28 Aug 2006 19:56 GMT | 7 |
I have a 97 metro 5 speed 1.0L and it runs fine. I am beginning to notice that whenever I downshift out of 3rd and 5th that I sometimes have to tug on the shifter to get it out of gear. I am still trying to gather data on this but it seems like one time it will come out nice and ...
|
| Storing your car. | 28 Aug 2006 19:26 GMT | 12 |
Hi, I am going into the military in a few day..which calls for me to store my car for only 2 months. Any recommendations, and step to take so when i come back it will be as i left it? Thanks!
|
| Bad rectifier or component in alternator drains battery. | 28 Aug 2006 03:51 GMT | 1 |
A 1988 Ford Escort with 1.9 L inline 4 has a 6 amp drain out of the battery when the ignition is off. The initial symptom was a weak battery unable to start car. Car started when jumped, but battery didn't appear to charge. In circuit voltage test showed 6V, and
|
| 2001 Crown Victoria Fuel Pump | 28 Aug 2006 03:42 GMT | 4 |
My 2001 Crown Victoria has hard morning starts(((hard start= cranking for 10 seconds..letting go of the key and then engine starts, very hi RPM in the "ON" postition)), but it starts fine for the rest of the day. What could be the problem?! Already replaced, fuel filter, Air
|
| acura rl engine revs when stopping! | 28 Aug 2006 03:25 GMT | 6 |
just wondering if anyone else has experienced this. when i'm coming to a stop either at a red light or a parking space, the brake pedal seems to get a little hard and the engine revs like i've got the accelerator to the floor. it feels like it wants to take off! and all the time ...
|
| Trivia questions - just for fun. | 27 Aug 2006 22:19 GMT | 26 |
I'll post the answers soon. 1. What was the first American car company to produce an overhead cam engine? 2. What was the second?
|
| 1988 old calais | 27 Aug 2006 20:52 GMT | 1 |
Hi all. I have a 1988 olds calais with the tech 4. Can anyone tell me where the fuel cut-off solenoid is located? Many thanks
 Signature sirdigger18058
|