Hi, I'm thinking of buying a 97 honda accord ex v6 with 100k miles on
it. I like it just fine, the only problem is is that it shakes quite
noticeably  when i brake on the highway over 60. Is this something that
must be fixed or is it likely that the car is safe with this problem

What is the standard brake bleeding sequence including the master cylinder?

hello i am replacing the water pump in my 93 buick lesabre. i see the
engine mount must be removed. i have all the bolts out but it wont come
out. what am i missing?

I'm still trying to find the radiator draincock on my 2000 Saturn station
wagon with the 4 cylinder engine. As I stand facing the car, I look to my
left at the bottom of the radiator and I see an ivory colored plastic piece
that appears to be a plastic bolt, but this piece appears ...

I'm looking at possibly what it'd take to pull the radiator on my RV...
I got under the rig & I could drop the radiator EXCEPT for 2 A/C lines
going to the condenser just happen to be in the way (@#$% ).
What would the procedure be for disconnecting the condenser A/C

I have a 1999 Dodge Grand Caravan and I need to replace the Vehicle
Speed Sensor. I bought the part, but am unable to find where it goes. I
am pretty new to repairing my own vehicle so if you know where this
part is please be very descriptive. Thanks in advance.

Simple question: In California, what are the consequences of selling a
car to a friend for $1? Are there any tax consequences for ME, or any
income tax issues for the friend? I think there are, but haven't found
anything concrete to guide me. Basically I just want to give the car to

It's got 43,000, mostly city driving with some brief freeway runs. Two
probs. First, it's using about a quart of oil every two or three
months. Not leaking on driveway and the car's not smoking. Inside of
the exhaust pipe isn't light grey but it's not sooty black either. Is

On my way home from work the other day my check engine light came on.
The next day I had it at the mechanic to see what that was all about.
They came back with a code P1135: Manufacturer's Controller Air & Fuel
Metering Air/fuel sensor heating circuit (reading off the estimate) for

I have worked out the retaining pin and have the axle out. When I tried
to put the new axle on I noticed that the pin alignment holes don't
align cleanly. When placed on the splines properly the hole shifts to one
side or the other depending on which spline I choose. When I tried ...

I recently put in a new engine into my car, and in the process took the
torque converter off. In doing so, some fluid spilled out. Upon
re-assembly, i tried to pour new fluid into the converter, then put the
engine back in. Now the car wont move. I am assuming the the torque

I would like to direct you all to a website that I've been working on,
<a href="http://autotechtoolsandtoys.com">autotechtoolsandtoys.com</a>.
We scour the internet for the best values on tools and toys that will
interest the auto repair professional, and post the best finds. The

Where is it found on the engine?

I have a 1999 Ford Ranger (manual transmission) and I am having some
issues.  As best as I can, here is what is happening...When, and only
when, the truck sits parked for more than say 4 days, I get in it to
drive it, put in in either first or reverse gear and it seems that the