| Thread | Last Post | Replies |
|
| subaru bounces too much | 16 Sep 2006 23:50 GMT | 4 |
hi, i just got some new Apexi springs put on my car and now it bounces alot the wheels stay firm on the road but the body of the car bounces alot is there any way in fixing this and if so what is the problem?
|
| Possible issues with 1993 oldmobile 88? | 16 Sep 2006 22:43 GMT | 3 |
Hey all, My mother came home to tell me her car wont start. I have not had a chance to look at it yet but my brother tells me that the car has spark, and has fuel.. Which they popped a gas line off to see, but the
|
| Gas in Oil | 16 Sep 2006 17:42 GMT | 2 |
It's an '87 ford tempo 2.3 L with lots of miles on it. 175,000. She was driving it OK when it just quit at a redlight. She had it towed to a repair shop and had it fixed. They listed the repairs on the bill and one of them was an oil change due to gas in the
|
| Ignition Coil Overheat | 16 Sep 2006 17:05 GMT | 49 |
I have an old jeep with an 302 ford engine in it & I keep burning up the 12 volt accel ignition coil that is mounted on the firewall. I have checked the wire connections & the vehicle ground & they appear to be good. Does anyone have any suggestions? This is my third coil I have
|
| Too goofy? | 16 Sep 2006 11:33 GMT | 28 |
With all the problems we have discussed recently about cooling systems, I would like to revisit a question that, I believe, was posted some time ago: Basically, why could not a system be developed that used an
|
| Engine stalls when car on idle and A/C is turned on | 16 Sep 2006 07:34 GMT | 1 |
Hey guys! I have an issue with my Mitsubishi Eclipse 2000 GT. Suddenly now when I start the car, everything is well. After I turn on the A/C, the engine RPM goes down to 0 and the engine quits. This only happens when I have
|
| New Weber Carb Failed Emissions | 16 Sep 2006 03:48 GMT | 2 |
I just intalled a new weber conversion kit on my 88 Wrangler (6 cyl). According to my mechanic, during the emissions part of my NY inspection, the numbers were perfect at an idle but as soon as it was put on the dyno, the o2 was high and the emissions failed. I have tried
|
| 1975 corvette | 16 Sep 2006 02:53 GMT | 1 |
I have a 75 vette with a 4 spd transmission. The ignition key will not go into the lock positon so that I can remove it. Is this an electrical or mechanical problem?
|
| Super Plush Ride From My 01 F350 15 Passenger *Family* Van? | 15 Sep 2006 17:01 GMT | 1 |
To help the stock suspension on this van would air bags help, or an upgrade in shocks? I know this thing isn't meant to offer a really great ride, but I'm just wondering what might improve the ride, specifically the side to side movement that happens occasionaly. I just
|
| '94 Chevy S10 won't start | 15 Sep 2006 13:50 GMT | 1 |
My '94 Chevy S10 will not start, and previously when it did start the engine would turn over very hesitantly before running. I am assuming the starter motor is bad, and the battery may still be good since all the lights turn on.
|
| The Windshield & Rearview Mirror Saga | 15 Sep 2006 12:54 GMT | 8 |
My son through a baseball in the car knocking the rearview mirror off the windshield. Now get this... The adhesive between the baseplate and the windshield did not fail; the glass did.
|
| NINE CRUCIAL ARTICLES FOR FIGHTING THE SATANIC JEWISH NEW WORLD ORDER: THESE ARE NINE ARTICLES THAT I HAVE BEEN POSTING OVER THE PAST SEVERAL DAYS AND REVEAL THE SECRET TO TAKING BACK OUR COUNTRY!! | 14 Sep 2006 22:44 GMT | 7 |
NINE CRUCIAL ARTICLES FOR FIGHTING THE SATANIC JEWISH NEW WORLD ORDER: THESE ARE NINE ARTICLES THAT I HAVE BEEN POSTING OVER THE PAST SEVERAL DAYS AND REVEAL THE SECRET TO TAKING BACK OUR COUNTRY!! by Raymond Ronald Karczewski© -- A Living God
|
| help on airbags | 14 Sep 2006 17:34 GMT | 1 |
I am doing a research on the cars. I am looking for all the technical informatrions for airbags (materials, time of deployment, inflation etc) for the cars of Nissan, Toyota, Ford, BMW, Daimler Chrysler for all the models they have made till now. Any sources and information for
|
| ? about 97' cadillac seville | 14 Sep 2006 16:04 GMT | 9 |
I turned the key and nothing. Got good cables, battery, charge... so I though it was the starter. The darn starter is under the intake manifold! I wanted to make sure it was the starter before I went and pulled the manifold to get to it. After further examination I noticed
|
| Data on normal readings from sensors? | 14 Sep 2006 15:49 GMT | 6 |
I'm working on a pesky little problem on my 2000 Chevy Astro/4.3L AWD minivan. The thing keeps lighting the MIL with a code of P0101 - something about the MAF sensor readings being out of spec. I connect my OBD-II monitor to the car and I can see the MAF go from .7
|