HI All  I'm new to the group, My neighbor gave me a 1995 Park ave
ultra> The battery was weak so I hooked up my charger /starter to it
hoping that it would help me start the car, but it did not. I was
trying to figure out if its the starter that is bad , or would the Pass

Trying to determine if one of the two :
http://www.myscantool.com/order.html
or
http://www.palmerperformance.com/store/product_info.php?cPath=24&products_id=32

If I rebuilt a car, and want to get new vacuum diagram, tuneup for under the
hood and the label that's normally found on the door, can I get these from
someplace?

I have an 03 Sierra that I can't get the wiper arm off the post, tried
a batterie cable puller with no luck also, any ideas?

              Question for you all. On GM's 3800 II engine, how does
it know what the temperature of the engine is so that it knows the
correct air/fuel mixture? Reason I ask is that at 160-180 degrees my
engine has a 50/50 chance of starting. I'm thinking the car thinks the

Why do some transmissions have a filter made of fiberous material while
others have just a fine metal mesh screen?
Why aren't fiberous filters sold as replacements for metal screen
filters?

Car starts fine and idles with a vibration / out of balance feel. When
accelerating
the truck feels as if one cylinder is not firing. I have seen this
exact condition

Recently I cleaned EGR valve twice to put out the check engine light.
Today car started making noise while accelerating and it is producing
considerably less power. A quick check under the hood revealed that a
hose between EGR valve and EGR modulator somehow disconnected. The

I have a 1985 chevy celebrity two door, 2.8 v-6, fuel injected. My
problem is this-when I try to start my car it tries to turn over but
won't start. I know what your thinking but this is what I have done so
far.

A friend has a '92 Toyota Camry and the rubber inside the upper
engine mount ("dogbone") is cracked.
It looks to me like it's a simple procedure: just remove two bolts,
replace the mount, and replace the two bolts.  It doesn't look to

<rant on>
I hate wheel alignment.
Often you aren't sure the work is needed either before or after the
work is done. It's a mysterious process based on light beams and

('99 Cavalier) The tensioner pulley is a little hard to reach, but I can
definitely feel some movement when I wiggle it with my fingers.   I'm
thinking this is no way good?
Thanks,

I own a 2000 Ford Taurus.  Recently I started to notice that when the
car sits for a long period of time (overnight for example), it leaks
enough fluid to form a small puddle behind the left rear wheel.  I
don't smell gas, and when I wipe the stuff off the floor, it does not

Trying to put together an emer car kit.... water, food,
wiper blades, etc.
Need someway to jump start car.
Are cables still the best way or are these new jumper

99 wrangler TJ 2.5 litre.  I am putting a rebuilt motor in my jeep and
i need to reuse the valve covers.  When i went to the auto parts store
to get gakets for these, the computer said there wasnt any gasket for
the valve cover.  Does anybody know why this is or what needs to be