I have a 86 Toyota Corolla SR5.  I am curious if the seatbelts should be
tested by a pro to ensure that they're still functional - so I don't have to
find out the hard way if they still work?
I am wondering if, over time, seatbelts decline, mechanisms get sticky, or

I have a 1986 Civic that's been sitting outside for about 4 months now.
I tried to move it the other day and found that the rear left wheel is
locked and I was only successful in dragging the tire across my
driveway. The other side seems fine.

I have a 1999 Taurus that is having transmission problems. Here's some
background:
3.0 V6 engine. Runs great, and up until recently, shifted fine. After
driving home one day, we get in to leave and the car will not move in

I Have a 1986 Chevy K10 4 wheel drive ( 305ci, 700r4 tranny, np208
transfer case), the truck has a very very loud grinding noise. Like
something is stripped or something. So i took to very reputable shop
and he has checked yoke on rear end, yoke on transfer case, i had him

I am only posting this to make people aware.
My 06 Chevy Equinox that has less than 5K miles on it had/has a problem
with the power steering. For those of you that don't know, it has an
electric Power Steering pump. Anyway, my wife drove it to the grocery

Autotree Pro Ver. 1.45 is a 32 Bit ( WIN95-XP) software Application for
automotive diagnostics. The program written in a Tree format to make
systematic and quick diagnostic checks a breeze, organized by area
(Engine, Transmission, Electrical, Fuel, Emission, body, Clutch, Etc. )

Hello, Could someone tell me how to remove a radiator step by step from
a 1997 Ford Taurus 3.0 v6 or give me a site to go to . Thank You Dobbin

Anybody out there know of a book or a series of books (ISBN would be
great) on Chassis design for morons (me) good with me hands but not the
sharpest stick in the bunch, so it must be aimed at the man in the
street.

Hi group,
and sorry in advance, for some of you will for sure concider this post as
spam.
However, i have started a site for the exchange of any kind of written

...that's worth a sh.t?  I bought a new one at my FLAPS a couple months
ago, used it to fill one transmission and one rear end, and it's a
paperweight now.  Haven't seen one in any store that doesn't look like
the exact same one.  Do I need to find a Snap-On truck guy to be my ...

My 95 ford taurus won't start.  It cranks fine, but won't take off.
I have spark. I have 40psi fuel pressure at the test port.  I have
changed the fuel pump and fuel pressure regulator.  I discovered after
the fuel pump change that 10 gallons of gas are needed to prime the

I need a schematic and explanation for the removal of a 1988 Dodge
Ramcharger windshield wiper motor, specifically how the motor is
splined onto the wiper arm assemblies.
Motor has power but is frozen up and won't respond to tapping or

I have a 1995 Ford Ranger 4.0L.  The PCM set a P0340, or Camshaft
Positon Sensor Malfunction.  My engine is not equipped with a Camshaft
Position Sensor, and the vehicle runs fine with the code set.  Any idea
what the deal is?

Apparently the keyless entry on Vlad the Impala does not work at my
local Harris Teeter.  The last time I was there, I noticed when exiting
the store that I had to open my door with the key.  I just assumed at
the time that either a) there was a fault in the car's system since ...

Hey guys
            I just rebuilt the 4l60e in my 98 Suburban. I installed
the Transgo shift kit and used the master rebuild kit from Dacco and a
new torque converter. I also cleaned out the cooler and lines with the