Hi, it's a '92 Pontiac Grand Prix LE 3.1 V6, auto, air, 4dor in an
elegant off white.
The snificuntuther drives it home fine last night and calls up to say
"she no start" this afternoon. It's 34 degrees out. It cranks and you

i've got the above pickup that broke down on me one cold morning when I
tried to start it. The motor has just gone through a rebuild. Its got
all new timing components new crankshaft with all new bearings, new
pistons,rods, water, oil pumps, rebuild carb, etc. anyway my first

I've got a 19861/2 Nissan pu d21. The other night my son and I were
driving home and discussing a voltage problem and doing a little fild
experiment trying to figure it out. The home stretch he decides to run
the RPMs up probably around 6,000 and waualla we blew both hig beams.

I asked this at the end of a similar thread but that one lools like it
is attracting more opinions about the original poster than it is
information.  As a result, I decided to repost it here as a seperate
question.

88 New Yorker
I have a lot of play on the passenger side where the tie rod goes into
the the steering gear. The other side is tight. What is going on here
and how do I repair it?

I'm experiencing problems when trying to fill my vehicle with gas.  It
appears that something is blocking or restricting the gas flow.  I can
only manage to squeeze 2 to 3 cents worth of gas at a time before the
pump shuts off (as it does when the tank is full...but this is not the

I need to rule out bad pump.How can i energize pump after all other
sys.I have orange /yellow/black/pink wires going into the tank
connector.My original problem was bad fuel.Which wire do i energize and
from where.

Hey guys!
I have a 2000 Mitsubishi Eclipse GT.
My car was running fine until yesterday (no warnings, etc) that I gave
it to a person to do a paint job on it.

I recently got my engine oil changed at NTB; and just after driving the
car out of there my transmission started giving me problems.
does anybody know what can cause this?
I was in front of the mechanic when he was doing the oil change; and I

I've been getting a "TCC System" code for a while now (months) on a 93 Grand
Am.   There doesn't seem to be any problems with the way it drives.  Can
this effect my gas mileage.  What should I do?
Thanks.

I've encountered several splice repairs made with a Dorman brand
compression fitting on automotive steel brake line. I was trained this
was not an acceptable or legal method of repair. I've found the DOT
regulation regarding splicing of tubing which states all fittings must

Does anyone know how to change the head light on a Mazda 6.  I
attempted to figure it out on my own, but couldn't do it.  For the most
part it looks like a sealed assembly from the front.  My hunch is I
need to go in from the back, but can't find how to release the assembly

Other than a few derogatory comments abpout the price...
No one really told me why I should NOT buy an Airhog filter.  Is there
a REAL reason????
At $11-16 for the standard filter for my 4.2L F150,

Well I live in Vancouver and last week we got dumped on with snow.  Now
I think i know how to drive in it but i dont think many others grasp
the concept well, any ways someone in the opposite lane lost control
and swerved into my lane i avoided him but hit the curb with my right

I need the tyre pressure table for all cars in pdf or any other format.....
Can anybody halp me?
Thanks