I'm looking for people to trade automotive & shop related software with,
drop a list of software you have to trade with and what you want off my
list and we'll do some bargaining, you can e-mail me your list and what
you need in return to automotive_software_trader@hotmail.com and ...

Yesterday I went to Autozone to read codes, and I've got ''the PCM has
determined that multiple random misfires have occured in cylinder #2, #3, #4
and Troubleshooting PO300, PO302, PO303, PO304.'' What does that mean? How
expensive is to repair them?

Since I was a child I have heard that NAPA is the best place to get auto
parts. They are a little more expensive but have better rebuilt and new
parts.  Also employees are more knowledgeable. Agree or not?
For example would a rebuilt alternator, starter etc be better quality if

A friend with an 88 Park Avenue has a small intermittant radiator leak.
I can't see it,
but I'm pretty sure it is upper left corner front. I'm also pretty sure
there are no hoses there.

I recently bought a 1993 Vauxhall Carlton 2 litre 8 valve at auction
and it started and drove very well. Then one weekend, i left the car
running and after about 10 minutes of idling, i noticed it starting to
idle very rough. The car would shake and revs would drop then go upto

I've been looking at these memory saver tools, they use either a 9 volt or
12 volt battery source. They plug into the cigarette lighter and maintain
the computer, clock and radio settings when you disconnect the vehicle
battery.

I have a 305 thats been stroked to a 334......... the cylinder bore is
3.766(a .030 overbore)  originaly 3.736........ what size gasket should
i use....... ive read alot of stuff about the size and thickness but
what size should i use and if i have to special order one, where can i

A friend of mine drives a Freightliner bus with a Caterpillar engine. The
bus is electronically governed to go a maximum speed of 67 miles per hour
and his company's mechanic won't change it to 70. He said that he heard that
a person can make their own programming device by ...

In warm weather or whenever the engine is already warm - it starts right
away and runs excellent.  In cold weather (below about 40 degrees F) it is
hard to start.  After about 6 trys it will start.  What is the most probably
cause - cold start valve, aux air regulator, ...

my 4 wheel will engage on the shifter and the driveshaft turns and it
gears low and high the back tires but i still get no 4wheel .Is there
an electric part or wire that may not be working ? The truck goes into
4low and 4 high the front driveshaft turns but it will not engage the

Hi there..I wanna change the transmition oil and diff oil as well..but
i dont know what is the spec for the ford fairmont 1997..transmition
ooil and diff..I realy need to change.its been long time i had a car
and never been chage since i got it...

99 Suburban with 350/FI and 127K miles. Noticed a small oscillation in
the temperature gauge about 2 mo ago, then one episode of spontaneous
temps 220+ with loss of coolant. Now I have developed an external leak
that appears to originate at the front of the passenger cylinder

I have a 96 chevy truck Silverado with a 350. It has an oil cooler. I
have a leak somewhere and was going to replace the seal in the oil
filter housing. I have never taken one apart and my Hayes manual does
not have a description of it. It looks like two bolts undo it. Do I

We have a 67 Camaro SS 396.
It was a factory 396 car but it had a 350 when we got the car.
We are putting a 396 back in it.
We ordered big block motor mount towers.

My cousin has a 2002 Honda Primus, which was experiencing transmission problems,
like jerky stops.  Luckily, he had taken out an extended warranty with
Honda, so he is covered for this repair.  At first, Honda tried different
transmission