Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / April 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Dodge Ram Sludge30 Apr 2007 19:10 GMT3
Have a Dodge with 130K miles. Just had all new SYN Oil and lube done
and was on the highway about 2 weeks later and the oil pressure gauge
dropped to zero. The Check Engine light came on and we pulled over and
checked oil. Oil was full abd when we started we heard a light ticking
95 explorer brake problem30 Apr 2007 17:55 GMT3
Ok, I knew just enough to be dangerous when I tried to top off the
brake fluid reservoir. I had a focus previously and the brake and
power steering fluid were in the same reservoir. So I put power
steering fluid into my brake fluid tank. The brakes started to fail,
Toyota engineers convicted of stealing secrets from Ferrari.30 Apr 2007 13:23 GMT11
I just now read about that at,    www.autoblog.com
According to the article,some people at Ferrari stold some secrets from
Maranello and they are accused of giving the secrets to rivals at Toyota
F1.
question30 Apr 2007 06:59 GMT4
what does
max power 5.59 KW@7500rpm
and
max torque 7.85Nm@6000rpm
Any Idea About Finding Out If A Car Is Stolen?29 Apr 2007 22:23 GMT5
I'm looking at a Mustang to buy, a 1965, and the Vin on the door and
the frame are different (no surprise there!) but the car is titled and
registered by the door vin which is totally incorrect. When I buy it,
I want to register it by the frame Vin, the corrct one, but I want to
89 topaz wont start29 Apr 2007 21:10 GMT1
i have a 89 topaz that wont start was running fine shut it off after
work tried to start it would not start i can not hear the pump kick in
is there a relay and if so where is it located
2000 Honda Accord a/c compressor locked up29 Apr 2007 06:36 GMT1
My 2000 Honda Accord a/c compressor locked up, the belt started to
burn. The car has 82,000 miles on it. I was able to drive it to Honda
dealer were I do all my repairs. They told me I need a new a/c
compressor, belts and it will cost $1,880.00   I was shocked at the
Sebring starting problem28 Apr 2007 15:51 GMT1
I have a 1999 Sebring with 69K miles on it. Occasionally when I try to
start the car it runs for a second or two and then dies.  A second try
and it does the same thing. After that, the car is completely dead when
I try to start it again.....I turn the key and there is no sound, no
Lifters & Pushrods28 Apr 2007 15:37 GMT2
Gee I just love Hyjacked threads.. Not!
I haven't  gotten much futher on MY project.. BUT.. I have these
pushrods and lifters that I found in my stash.  I don't know the brand
name of them but the pushrods are 0.3125" - 0.313" dia. max. and
How to fix this exhaust...28 Apr 2007 00:17 GMT12
This is on a 96 Lexus LS400, which is otherwise in great condition.
What are my options here? Sounds like a Mustang now, but I guess I
gotta fix it.
How much should this cost to cut apart and insert a new piece and weld
Any suggestions for rooftopping a boat on a 2 door chevy tracker???27 Apr 2007 20:17 GMT1
We've got a '98 Chevy Tracker 4X4 that we tow behind our RV on trips
to Baja.  We'd like to be able to also bring along a fairly light boat
by rooftopping it on the Tracker but I can't seem to find ANY
roofracks for the 2 door.  (There isn't much metal on the roof!).  Any
Request for mode 06 information27 Apr 2007 15:46 GMT5
Does anyone know where I can find Chrysler mode 06 scan tool information?
I have found websites with information for Ford and GM but nothing for
Chrysler.
My scantool instructions say to check the factory service manual for test
I think I messed up my engine?!27 Apr 2007 06:41 GMT20
I just ran over a curb and I think I messed up my engine! Now when I
shift the gears the light doesn't move all the way to the park slot.
The car parks but the light doesn't move all the way to where the park
light is supposed to light up.
Advice needed: Misfiring cylinder on Mazda 62627 Apr 2007 03:39 GMT2
My 98 Mazda 626 LX (manual, 112K miles) has been at the mechanics for
the past 2 days. It started off as a problem with an exhaust pipe at
the front. I have also had a catalytic converter code for a few
thousand miles and it needed to be replaced. He is charging me about
1997 Chevy Silverado 4x4 5.7 k1500 Engine27 Apr 2007 02:39 GMT4
Does anyone know where I could find an engine for my 97 Chevy
silverado 4x4 5.7 k1500?
I can't find any used engines in my area. I would get a crate motor,
but kinna tight for money right now.
Pages: 1 2 3 4 5 6 7 8 9 10 11 March, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.