Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / April 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
92 Buick Century idle problems27 Apr 2007 00:56 GMT3
I have a problem with a 92 buick century 6 cyl that either runs at a
fast idle or stalls when it is idling. The check engine light does not
come on.
Sometimes it runs fine, but not very often.
new design27 Apr 2007 00:51 GMT1
i wonder to know can i divide a 4 cylender motor into two cylender
without any change in disign?
Radiator overheat but temperature gauge is still normal26 Apr 2007 23:29 GMT7
I have a 95 Toyota Camry (4 cycl. auto transmission).  The temperature
gauge went up to the red zone a month ago. So, the radiator was
replaced with a new one.  Three weeks later, the temperature gauge
went into the red zone again, and the radiator was found leaking
1954 Chevy voltage conversion26 Apr 2007 19:23 GMT15
What all would be involved in converting a 1954 Chevy Bel-Air from 6
volt to 12 volts...If anyone knows a bteer group to post this question
in thanks for that info also
Help me Learn26 Apr 2007 18:41 GMT9
I need help in understanding.  I just took my car to SunDevil Auto for a
oil change and they said I had a lower intake leaking coolant, that my
right wheel cylinder is leaking and my oil pan gasket is leaking, along
with my front crank seal can anyone please explain to me what these ...
suv front end too low26 Apr 2007 14:36 GMT1
Hi all, i have a problem with my suv.  my suv is a toyota land crusier
and the front of the car is too low.  what might cause this problem
and how do I solve it?
20 inch rims on a Taurus?26 Apr 2007 06:21 GMT13
Could 20in rims fit on a taurus w/o needing a lift?
Intermitant starting problems26 Apr 2007 04:29 GMT1
I have a 1999 Sebring convertible with a 2.5 Litre V-6. The car runs
fine but at random times the car is completely dead when the ignition
key is turned on, or it cranks the starter very slowly and then goes
dead.  The next morning the car starts fine. The alternator and battery
2000 park ave air conditioning25 Apr 2007 21:41 GMT1
The air conditioning on my 2000 park avenue blows cool air on the
passengers side but uncooled air on the drivers side. What is the
problem and how can it be fixed?
Ed
Need online store suggestions25 Apr 2007 19:10 GMT2
I give up on finding a decent gauge manifold in meatspace. Need suggestions
on reliable and reasonably-priced on-line stores. (Favorite brands of
gauge sets are welcome as well.)
Shopping cart caster25 Apr 2007 03:35 GMT1
what is the scientific explanation of shopping cart wheels to turn in
opposite direction while travelling in some direction? what kind of
forces act to make them behave like that? is it related to weight
bias? or is the friction force changes according to the caster angle,
air conditioning25 Apr 2007 02:24 GMT2
The air conditioning on my 2000 park avenue blows cool air on the
passengers side but uncooled air on the drivers side. What is the
problem and how can it be fixed?
Ed
air conditioning24 Apr 2007 22:25 GMT1
The air conditioning on my 2000 park avenue blows cool air on the
passengers side but uncooled air on the drivers side. What is the
problem and how can it be fixed?
Ed
Intermittent Engine Starting Problem24 Apr 2007 22:07 GMT11
1995 Ford F150 with V8, 220k mi.  Truck developed weird symptom where
it would not start when it was raining and cold.  Battery is topped
off.  Headlights and accessories appear strong.  All fluids topped
off.  But from a standstill, I turned the key, all indicators worked,
F150 rear axle vacuum lines24 Apr 2007 21:21 GMT4
I'm trying to figure out what a couple of vacuum (I think) lines
running into the universal joint at the rear axle are for.
There are two lines, both connecting to a V shaped connection near the
universal joint. One of these lines isn't attached to anything, and
Pages: 1 2 3 4 5 6 7 8 9 10 11 March, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.