Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / May 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
A/C knocked out by electrical problem?31 May 2007 19:15 GMT1
Awl--
I have encountered a few cars whose A./C just stopped working
altogether--one occured after a horn repair, the other after a light fender
bender, the other intermittent on/off (when on, was fine), then just stayed
Save Jericho!31 May 2007 17:41 GMT4
please join me and others to support and save Jericho show, should
this show be wiped out on air? this show offers a perfect portrayal of
modern family. The Save jericho campaign was made to make our voices
louder for CBS to hear us. Check it out and tell your family and
1992 Buick Century Ignition Switch ???31 May 2007 16:55 GMT2
Is there any way to test or adjust the ignition switch in a 92 Buick
Century?
where to buy good quality grease/oil stuff?31 May 2007 11:48 GMT20
Specifically I need a grease gun and a suction gun...  where does one
buy this stuff?  All of the stores around me sell the same stuff made by
"Performance Tool" which looks to be of about Harbor Freight quality...
 bought a suction gun anyway and it's already in the trash.  I ...
Bandless automatic transmissions?30 May 2007 16:54 GMT14
I know Honda and Toyota have used bandless automatics for at least 20
years, and Chrysler's A604 was also bandless.
Any other bandless automatics out there?
HORSEPOWER FROM OBD2 DATA30 May 2007 07:28 GMT17
I"m writting a software who get some data in my ECU via the odb2
connector and interface.
I can get rpm / speed / and elapsed time from the begining of run
I see on internet some software who dyno the car with a rpm/time
2008 Porsche Cayenne30 May 2007 04:50 GMT1
The Cayenne S and Turbo are even more muscle-bound than before, with
power increasing from 340 and 450 hp to 385 and 500 hp, respectively
http://automobnews.blogspot.com/2007/05/2008-porsche-cayenne.html
gearbox is jamming - nissan micra 1.2 '8929 May 2007 19:58 GMT20
I'm sorry to post that the gearbox of my nissan micra is functioning
alarmingly difficultly.
It seems something is wrong with 3rd gear, but only when passing from 3rd to
neutral or to all other gears ( I didn't try from 3rd to reverse ;-) but in
Camry car battery draining after a few weeks29 May 2007 19:05 GMT7
My 2002 Toyota Camry runs and starts fine except if I go away for a
few weeks, the car battery is completely dead when I return. First
time, I replaced the battery. Second time, I took it into  the dealer
who checked the electricals said it was fine and that I had tightened
VOM with max/min/average recording feature29 May 2007 14:14 GMT4
Do any of you have a VOM with the above feature which you would
recommend, and which would cost less than about $150??
PC interface for car engine temperature and other sensors29 May 2007 10:19 GMT1
Normally, sending units (sensors) for coolant temperature, fuel
pressure, and such are connected to analog gauges. Can anyone point me
to products/kits/thingamagigs  that can be used to connect the sending
units to a computer, maybe via a USB interface. I want to collect and
Voyager brake lines28 May 2007 22:37 GMT3
1995 Plymouth voyager sport/se NON-ABS.  Rear brake line has rusted
through and started leaking was going to have it replaced when the
mechanic explained that there is a aluminum metering?/pressure? Block
and that he has never been able to get the brake lines off of one with
no clearcoat, what to do28 May 2007 21:43 GMT5
I have a beautiful 1990 Pontiac Bonneville in great condition.
Just gave her a good once over, but really want to take care of the
top & hood--no clearcoat left, some damage from oak trees.
We use Meguiar's for cleaning to waxing to detailing.
Odometer Question28 May 2007 18:53 GMT1
I was wondering if it is possible for an odometer to stop working above a
certain speed. I think my husband's Mazda truck might be having that problem.
He just went on a long trip, almost all highway, but the odometer only moved
about 30 miles. Seemed to be working okay in the city ...
1956 Ford Car.28 May 2007 18:19 GMT7
Last Monday a very good friend of mine who lived in my neighborhood
passed away.He was 84,he is originally from Louisiana,I have known him
since he moved to my neighborhood back in the 1960's.He was in the
U.S.Army,149th Signal Company in World War Two,in Europe.He worked in
Pages: 1 2 3 4 5 6 7 8 9 10 11 April, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.