i want to know your opinion on. like to add more things on it.
top domain is:
http://www.bayareacarfinder.com
this sites also has sites for other cities SF Bay Area like

Can someone please explain what "Port Installed Accessories" are and
why they exist? If it is what it sounds like - a facility at the ports
where technicians install items on cars - why does this exist? Why
don't they do this at the factory or dealership? What is the reasoning

I have a question for the group.  We were towing a travel trailer with
our 2000 V-10 E350 van, and after driving about 400 miles between Ft.
Davis and New Braunfels, Texas we encountered the following.  We
stopped at a stop light and as we came to a halt, we heard and felt a

I have an 87 V6 Dakota with a Holley 6280 carb, similar to the 2280
except it has an O2 feedback solenoid operating the supplemental fuel
jet rather than vacuum control.
Here is the problem. The fuel escapes from the float bowl after the

Recently I replaced the fuel filter, spark plugs and distributor.
After we put the new distributor on, the right head light stays on
anytime the car is running.  It turns on as soon as I start the car.
The left one only comes on when I turn the lights on.

I went to give my new-to-me truck its first shots of grease since I
bought it.  I had some trouble with the passenger side lower ball
joint in that it seems that the grease doesn't have any oil left.  I
couldn't get any grease into the joint so I removed the zerk to find

I don't own a Pontiac GTO.But,many years ago,I read in an auto magazine
GTO means (not sure if I spelled the last name,O right) Grand Turismo
Olimagarto.
I was looking around on the internet,but I couldn't find any information

I'M GAY, I'M VERY PIGGY, I LIKE SUCK f.cker MAN, MY NAME IS FABIO, I'M
ITALIAN BOY
IF YOU'RE WRITE TO ME, I SEND TO YOU MY PHOTOS IN A HOT MOMENTS
KISS,

I have a 1990 Plymouth Sundance. Odometer says 125k but it broke several
years ago. So heaven only knows how many miles are actually on the car. I
bought it as a program car with 5K miles on it, all the other mileage is
mine. It's been a great car and I've kept it maintained and ...

Hi all.  First timer here (yeah I'm a newbie with very little
automotive knowledge, so please be kind).
I found what I thought was a pretty decent deal in the local paper
today.  '97 Dodge Ram 2500, V10, 63k miles, new tires, automatic

98 Ranger.  Not the version of the sensor that eats shafts up.
  Intermittently I get the P0304 (iirc, bank 1 cam position sensor
circuit fault) fault code.  Every single time I can just clear it and
it'll be gone for another few weeks, but then, randomly, it occurs

Here's a pic of a 14 inch long, half an inch in diameter, pinch bar:
http://www.stanleyproto.com/catalog_images/web_detail/CT-1606_web_detail.jpg
One end comes to a point and the other is flattened out like the end
of a un-split crow bar. The flattened-out end is bent maybe 30 ...

I have a crankshaft position sensor failure on my Nissan Frontier 4wd
2.4 engine. I can purchase a new one but I can't find the old one.
Somewhere on the bell housing?

The first three levels of my fan have stopped working, only the fourth
remains. This means a lot of air in you face, no air conditioning
expect by means of switching between three and four every thirty
seconds or so.   I have heard it is a common problem but asked about

I've got a 2002 Dodge Intrepid that is pinging way too much.  I've switched
to premium fuel and that helped a bit at first, but it is still pinging too
much.  Vehicle has 145K miles.
A mechanic who saw the car suggested that the combustion chamber has taken