| Thread | Last Post | Replies |
|
| Used car maintanence strategy | 27 Jun 2007 18:53 GMT | 8 |
I have just bought a used car (Saturn) with 78,000+ miles on it. I will work it into a regular maintanence schudule -- but where do I start? A window sticker tells me about the last oil change, but I don't know about anythong else. I can guess it might need a transmission flush ...
|
| Looking for cheaper source for this steering ball joint for a go-cart | 27 Jun 2007 18:53 GMT | 2 |
Got this go-cart 2nd hand. One of the ball joints in the steering was reported to have been separated previously and now has excessive play (1/4" or so). Manufacturer quoted me $100 (yikes!) - http://www.allnewsports.com/gk70.htm
|
| AC Compressor Stops while not moving | 27 Jun 2007 15:48 GMT | 2 |
2003 Dodge Ram 1500, 4wd 4.7L V8 - approx. 2 years ago the AC stopped blowing cold when not moving. It actually felt like heat. Dodge service concluded 134a was a tiny bit low, but even topping it off to the standard 1lb 10ounce didn't do the trick. No leaks to speak of and
|
| Hi | 27 Jun 2007 13:18 GMT | 2 |
I'm new to this group and i'm a full time automotive mechanic. If ou need anything just ask : nabilchouchany@gmail.com. Hope i help as much as i want.
|
| Ford F150 Tempeartuer Gauge won't work | 26 Jun 2007 18:32 GMT | 13 |
1995 Ford F150 6 cylinder 4.9L My temperature gauge on the dash has been stuck on COLD for about a year. The heater produces hot air no problem. I changed the thermostat anyway, but it didn't make any difference. So when my mechanic was doing some other
|
| How airtight is a cylinder? | 26 Jun 2007 15:12 GMT | 36 |
In just a regular car engine, how airtight is each cylinder and about how much force does it take to push the piston down?
|
| Ignition Switch - 2001 Impala | 26 Jun 2007 03:32 GMT | 6 |
I need to replace the ignition switch in my fathers car. It's a 2001 Chevy Impala. I have a few questions about this repair. I keep getting conflicting information depending on who I talk to. My questions are: 1. Does this vehicle come standard with the passlock theft deterent ...
|
| Clunking sound from 2000 CR-V | 26 Jun 2007 03:06 GMT | 1 |
I get this sound sometimes at stop lights, not when moving. I sounds like a clunk in some sort of pump. Clunk, Clunk, Clunk, about one clunk per second or a little faster. It's been doing this for a month.
|
| distributor cap catched fire | 26 Jun 2007 00:37 GMT | 25 |
I have a 1989 GMC C1500 350 TBI. Has new distrubitor. Also has msd a6L. i was driving on highway about 60 mph for about 20 minutes, stopped at driveway and truck died. I seen smoke coming from under hood. I opened the hoood and the distruibutor cap was on fire. It was
|
| Contaminated Diesel Fuel ??? | 25 Jun 2007 20:07 GMT | 3 |
2000 express van diesel engine, fuel contaminated, fuel appears cloudy(milky). shop has drained the tank and changed filter however vehicle still won't start.they are suggesting a $3,000 injector pump. Any thoughts on possible contaimination, could the pump be worn out
|
| hissing noise? | 25 Jun 2007 14:45 GMT | 1 |
hello , i have a 1998 dodge stratus and am hearing some kind of hissing noise inside the car, near the heater and a/c controls. now my a/c doesn't work and until this noise started it was ok ,but i had to recharge it last summer. any ides what i should look for and how hard to ...
|
| 1997 suburban 5.7 225,000 km | 25 Jun 2007 01:16 GMT | 1 |
it seems ok when the engine is cold but when warm it idles ok, if i am sitting at a red light then the light turns gren the suburban barely crawls across the intersection. it will cruise on the highway ok but when i go to pass another vehicle it lacks acceleration. The fuel pump
|
| 1977 Chrysler New Yorker 440 Bbl | 24 Jun 2007 23:17 GMT | 11 |
I'm seriously thinking of buying one of these great old whales. Is there anything that I should be looking at in particular? Any common faults? Any known rust areas?
|
| Leaking AC Compressor | 24 Jun 2007 23:16 GMT | 3 |
I have a 1999 Dodge Intrepid 3, The ac compressor is leaking thru the front shaft seal. Instead o replacing it, can I replace just the front shaft seal.......I know can buy it..... how to? manual? tools
|
| suburban electrical problem | 24 Jun 2007 20:31 GMT | 1 |
My 2004 Chevy Suburbans Driver info has died the bose radio started to act up; bad volume levels and then a low noise occured after I turned the power off then it just died completely along with all the digital features in the instrument panel. What does this sound like? PS I cant
|