Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / July 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Painting the hood of a car13 Jul 2007 11:24 GMT20
Using a HVLP paint gun:
Do I stand in front of the car, and start from the back and work my
way across?
Or do I stand to a side and do one side (back to front), then move to
Tire invisible leak12 Jul 2007 23:46 GMT6
Hi - I have a tire that is constantly loosing air, sometimes as much
as 10 psi a day. I made two carefull inspection with soapy water and
it's still impossible to detect. Did somebody saw something like
this ? is there a possibility of rim crack that could leak only with
Mazda 929 can anyone help?12 Jul 2007 23:35 GMT10
I just got a Mazda 929 (1993) I love the car!
I have  a problem though. I recently got new spark plugs new wiring
etc done to the car.
But the car still feels like that it wants to stall out on me. I have
86 Olds Delta 88  wont start.12 Jul 2007 22:59 GMT10
Ok I know this is an older car but we love it and would like to get it
going again so any help would be great. ...First it has a 3.8 and just
turned to 100 thous miles and has ran like a brand new car till....We
took it to a garage and had some trasmission gaskets fixed and a
R134a additives? Worthwhile or bunk?12 Jul 2007 20:29 GMT20
http://www.fjcinc.com/fjcextremecold.htm
Is it worth the trouble to add this when retrofitting an r12 system to
r134a, or is it just asking for trouble?
1989 GMC truck ignition timing bypass wire12 Jul 2007 19:29 GMT5
My son has a 1989 GMC pickup that he just bought and we can't find the
ignition timing bypass wire.  I understand it should be a tan wire
with a black stripe.  I had the same on my 1987 GMC and it was located
at the firewall between the distributor and the master brake cylinder.
92 Olds Cutlass Ciera Fuel Pump problems12 Jul 2007 17:37 GMT1
92 Olds Cutlass Ciera, 3300, 127,000, will not start, crank but not
fire, no fuel at rail, pump does not come on when key is turned on.
Replaced fuel filter.
Applied 12 volts to fuel pump test connection still no fuel pump.
Can someone run a CARFAX for me?12 Jul 2007 02:13 GMT16
Vin:  1FMCU14T9KUA64508
Its an 89 Ford Bronco II.
Thanks a lot guys!
Which spark plug is better: V groove or U groove?11 Jul 2007 23:58 GMT11
NGK V-groove plugs have a V-shaped notch in the center electrode.
Nippon Denso U-groove plugs have a U-shaped channel in the outer
electrode.
Are there any reasons why one design should be better than the other,
Big problems locating replacement "Fan Control Module" (cooling fan module/variable speed) for 96 Escort LX 1.9L11 Jul 2007 22:26 GMT20
If anyone can assist in this parts search, I would be very grateful!
I've tried to provide full info, so please pardon the length of this
post.
Been grappling w/this for about a month in the desert southwest summer
Tire Size vs Speedometer11 Jul 2007 19:54 GMT13
Math never was my strong point. Curious how much my speedometer will
be off now that I have went from P215 75R15's to P215 65R15's. Anyone
who can help, thank you. I'm thinking, after driving a couple days
that speedo showing 75 means I'm doin about 65ish.
SAVE GAS - SAVE THE PLANET11 Jul 2007 18:42 GMT23
You can use FFI caps
These innovative caps are enhancing engine power and saves up to 20%
by using the gasoline thoroughly, reducing the leftover gases (co2)
released.(Works with both diesel and gasoline)
Douglas Kukucka has an extensive knowledge base involving vehicle    performance.11 Jul 2007 15:49 GMT1
Automotive technical talent and proficiency is more than an overnight
adventure but a passion that never ends.
From the time he was young, Douglas Kukucka has engineered his future in
the field of automotives by tinkering with small engines of all sorts.  
HOW DO I GREASE MY KING-PIN?11 Jul 2007 06:26 GMT2
I HAVE A 2003 INTERNATIONAL 4300 DT466 WHICH I (TRY TO) MAINATIN
MYSELF.  RECENTLY SOMEONE ASKED ME IF I WAS GREASING MY KING PIN(S)
WHEN I LUBED THE TRUCK.  THE 4300 DT466 IS A BOX TRUCK SO I KNOW IT IS
NOT THE TOWING KING PIN ASSOCIATED WITH A SEMI TRACTOR RIG.
96 Accord will not turn over10 Jul 2007 21:25 GMT5
I have an 96 Accord 4 dr LX a/t with 156k miles. Initially would click at
starter solenoid when trying to start but now finally refuses to turn over
at the starter. Replaced starter, master relay, starter signal fuse (in fuse
box) and battery load tests ok. I am pretty much at a ...
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 June, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.