I have a 94 Pontiac Grand Am with the 3.1 V6. I have a problem getting it
going when cold. Starts up fine, no fast idle though. If you attempt to
drive the engine stalls. Letting it warm up for a few minutes before driving
seems to work. Is there a cold start solenoid or something ...

Where should I set the timing on my 1989 Buick Lesabre 3800 V6?
Rusty

www.orau.org/ptp/collection/consumer%20products/sparkplugs.htm
Get ''Activated''
cuhulin

I have a '97 Toyota Corolla with a remote car starter....
I'm not sure of the model starter I have, but my remote has the name
Clifford on it.
My problem is that it works to unlock my car, but it doesn't want to

Son just bought a 2003 Dodge 1500 Pickup (4.7l engine)
It has chronic low oil pressure when idling -we're thijnking "new oil
pump"
But there are two issues that concern me about that:

my VW fox cannot settle on an idle speed.  It will race and then drop
down only to gradually start racing again with about 15-20 second duty
cycle.  It's really embarrassing sitting at a stop light.  People
think you want to race.

I have a 1994 Oldsmobile Cutlass Ciera with a V6. I had my spark
plugs
& wires changes yesterday due to rough idling. Yet, when it was all
said done, the engine is now shaking a bit. (Was not happening

Okay, listen to this.  I was on this site named
AmericanWineCompany.comhttp://www.americanwinecompany.com Anyway, I
got into their wine club for half the price of anyone else on the web
plus my wine arrived on time for my wifes birthday

I just had my truck checked out at the dealer for a rattle in the engine.
The truck runs just as it always has no performance problems.  It has 117000
miles & I am the only owner. I always change the oil every 3000 miles.
They are telling me I need a new engine.  Diagnosis is ...

My brothers and sisters everywhere! With this essay, I am not singling
out the adherents of Islam - to which I ascribe - but rather I am
writing this essay to every man and woman throughout the whole world.
I ask Allah that He facilitates tat this essay reaches every ear,

I have a 92 Ford Ranger XLT 5 speed manual 2wd with a v6 3.0 in it.  I
am lookin to change it over to a 5.0 that i found in a Murcury Grand
Marquis, but not sure exactly what parts i may need.  Im thinking that
i am going to need engine mounting parts, and a few other

I have a 93 Plymouth Grand Voyager. It back fires into the intake on
accelleration, worse when the ambient temp is high. Quick test on the
EEC are EGR related. eplacement of EGR did not fix the problem. I
suspect the backfire is setting codes. Fuel pressues is to spec.

http://peswiki.com/index.php/Directory:Valentin_Technologies
Well, I don't know.Free piston(s) engines and Hydraulic drive and
hydraulic motors in each wheel isn't exactly new technology.I have an
old Popular Science magazine here which dates back to the 1960s.The

My 1990 Chevy Celebrity Wagon, 3.1 stalls when going up a hill. Almost
feels like its out of gas but it isn't. *Sometimes* it will stall when
its on a level area or idleing. Trying to re-start can be a pain, but
eventually it will restart. Anyone have any ideas on what to look for

I am new to modifying cars and this question is probably not going to
make much sense but I still want to find out.
I drive a Nissan Almera Active 2001 1495cc and was wondering if I can
improve the performance of it.