http://www-odi.nhtsa.dot.gov/cars/problems/recalls/recallresults.cfm?start=1&Sea
rchType=QuickSearch&rcl_ID=07E090000&summary=true&PrintVersion=NO
Summary:
 CERTAIN DORMAN PRODUCTS AUTOMOTIVE ELECTRICAL REPAIR KITS, P/N 86689B,
 MANUFACTURED BETWEEN JANUARY 2006 TO OCTOBER 2007, ...

Ok, time for an update.
Per the discussion here prior, I tried resoldering all the connections
on my IPC.  Actually, I resoldered everything, but only on the circuit
board that didn't have the VFDs on it.

Camry is 99 4 cyl LE 95000 miles. Whenever car sits for more than 5-6
hours in cold or damp conditions, it will not start or sputter  and
die. It will start if  gas pedal is floored.
Car runs like a dream and starts normally in warm conditions.

Subject line says all...
my experience with various brands of shocks/struts:
1) Sachs/Boge.  Installed a full set of "Turbo Gas" struts on my '84 GTI
along with some H&R Sport springs.  Initial impression was good but

I have a 1994 Chevy 1/2 ton pickup and I'm suspecting the fan is not
working properly. Driving to and from work the engine smells a hot and
I'm suspecting the fan is not working well when driving in stop and go
traffic at the end of my trip.

my 1998 dodge stratus has the abs light on now. i was told that everything
should work fine other than the abs part of the brakes. the car now is
starting hard and acts like it's not getting enough fuel when i punch it. if
i work the linkage under the hood, and do it real fast , ...

I've got an '89 Toyota Cressida, and the cushion foam material that
covers the steering wheel has gotten soft/saggy & cracked where there
has been the most hand contact.
Is there some way to refurbish this other buying another steering

I tried doing some searches to see what the manufacturers recommend.
The only one I could find was BMW recommended a standard transmission
oil change at 30,000 miles.

I'm preparing to do a partial suspension rebuild on my '88 Porsche 944
(as soon as I get my new struts from Paragon, but that's another story
for another time...) anyway, the last time I had my head under the car
I noticed that the harnesses for the brake pad wear sensors were in

I have a 92 ford escort with 149k on it with a 1.9l motor. Its a 5
speed and a very good running car. I have a problem when I put it into
5th gear sometimes it will NOT let me take it out. Almost feels like
something is blocking it from coming out. This is happening more and

Some years ago, a mechanic "pulls the plug" so my car's speedometer
stops.  It's been left like this for quite a few months before it's
pluged back in.
Since then, different lights on the dashboard turns on for no reason.

On a 94 Beretta with a 6 cylinder engine there is a radiator bypass hose
going from the water outlet to the coolant reservoir that runs hot coolant
into the reservoir. Will someone please tell me why the bypass hose is
there? I see no need for it but I know it must be there for a ...

Hi, I've just gotten interested in the build it myself deal.  Who
turns out the best quality Crate Engines?      Cr http://tinyurl.com/34ktyo

Does anybody know of a web site that would tell me what size wheels would
bolt on to what cars?
Here is the issue.
I am trying to sell some studded tires (legal in Oregon) along with the

Paul,
It seems as though your post didn't upload properly or something?  Maybe
it's my machine or it was spam filtered.  Dunno.  Please repost your
response if it's possible.  Thanks. Andrew.