Rodents chewed on some of the wiring and now I have 'Check Stability
System' light on. The dealership says they will have to redo the
wiring and want to charge $450 plus.
Do you think this is reasonable, please advise,

I have an idea to install two temperature sensors, on two oil lines
what are coming out from the transmission  (Sterling 827).   One
sensor for the oil coming out of the transmission, and the other for
the oil return line.   I just don't know what thermometer should i

Hi ho-
  Got a few older Hilborn/Crower intakes collecting dust and would like
to convert them to EFI.  Trying to avoid welding in the injector bungs as the
heat causes distortion, which will likely require the intakes to be remachined

I am looking to help all people that drive a vehical. Whether gas, or
Diesel we can improve your milage by at least 3 miles per gallon, plus
more. This product is cheap and well tested my all Government and
state officials just take a look at this: www.cheapfillup.mybpi.com. I

I found this to be interesting if it is good research.
Gasoline
Research findings released last week strongly suggests that there is an
"optimal blend level" of ethanol and gasoline -- most likely E20 or E30

Im looking at buying a 2001 Nissan Frontier with 99k miles for
$8950.
Anybody have any dealings with this kind of truck?
Any kind of problems I should be on the look out for?

I'm in the process of going through all my files and cleaning
them up.........
for all of you DIY'rs.....who need, want, and beg for.....
too much useless info........i'm posting this for the archives....

please help me!

2003 model, 3.3L V6
Shudders while turning the wheel when stopped or very low speeds, like
pulling into the garage.
Found this web page:

Can someone recommend a place in the U.S. that will duplicate a key
for a BMW 328is?

Dear Friends
Being a trader i am alwayz in search of new products which could be
marketed.Last week i was offered a high temperature silicon thicked
grease , and it was claimed to have drop melting point more than 316

I have a 1994 Mazda 626 4 cylinder car.
I had an over heating problem that corrected itself when I took the
thermostat out of the car in the summer. I had a great deal of rust in
the coolant and used a radiator cleaner to try to get the rust out of

I have to repack or change the wheel bearings on my trailor. I have
taken the outer bearing off but the inner bearing seems stuck in place.
Any suggestions?
Thanks

I had a Lincoln dealer replace the heater core on my 87 Town Car.
Sometimes I think I get a slight smell of antifreeze.  If there was a
sizeable heater core leak before the repair, could there be some
lingering odor still there?   Could some of the old antifreeze still be

I am in need of a Chevy, factory service manual for a 1998 6.5td, Silverado
3/4 ton diesel truck.
Willing to pay a fair price.
I am having one heck of a time getting the timing chain housing/cover off.