Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / December 2007

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
98 Sable - No heat when moving09 Dec 2007 03:35 GMT16
Hi have a '98 Sable, 3.0L, overhead valve engine.  It's generally
around 35 degrees F outside right now.  If I start up my car and let
it sit there in park, the engine heats up and the temperature gauge
goes up to the 1/3 point or so and stays there, seeming to indicate
2008 Volkswagen New Beetle09 Dec 2007 00:26 GMT1
Driving off in iconic, head-turning vehicles like the 2008 New Beetle
and New Beetle convertible just got easier with new option packages
from Volkswagen.
Continue http://autoworldextreme.blogspot.com/
Who is Jesus?08 Dec 2007 21:57 GMT2
Who is Jesus?
Without a doubt, you have often heard the claim that Jesus is God, the
second person in the "Holy trinity." However, the very Bible which is
used as a basis for knowledge about Jesus and as the basis for
Fuel cell vehicles08 Dec 2007 20:45 GMT17
Our local paper ran an article about a new Honda FC vehicle in the
automotive section today.  The article waxed elequently about how the
emission is only water.  Of course, like most of these articles, it
neglects to consider emissions from MAKING the hydrogen.  Unless the
1964 impala ss08 Dec 2007 18:17 GMT13
i gotta 64 impala ss and after driving it around for about a week i
keep having to adjust the timing to fix the idle, any ideas why it
keeps doin this? could it be the distributor rubbing against the
firewall and moving around? any ideas?
Reading OBD Codes, 2002 Ranger V608 Dec 2007 17:26 GMT2
2002 Ford Ranger
3.0l V6
Engine warning lamp is [on].  I tried two OBD-II readers, neither
seemed to recognize they were plugged in to the connector, (under
95 3.8L transport08 Dec 2007 17:25 GMT1
Car starts but shuts off in just a few seconds like you turned off the
switch. (cold)  Other than that it runs good.  No check engine light,
(just replaced the battery because of starting issue.) anyone have any
ideas.  (fuel, or ignition?)
Redhat Linux Network Security08 Dec 2007 00:28 GMT1
Redhat Linux Network Security
Covering everything about security would take several volumes of
books, so we can only look at the basics. We can take a quick look at
the primary defenses you need in order to protect yourself from
How do repair shops price the parts they put in your car07 Dec 2007 17:01 GMT19
I'm used to using the dodge dealer where i bought my truck so this
question never came up.  Now that I'm starting to use other shops, i'm
wondering how much they typically mark up the parts they order.  I
just went to an NTB/Merchants place for new front upper ball joints on
1974 Nova Upgrade07 Dec 2007 15:51 GMT6
We have a 1974 Nova and it's time to upgrade. We are the original owners
and know it's history.
It has a 6-cyl 250, 3 speed transmission and drum brakes.
My upgrade plans include the following major steps
Diesel engine starter07 Dec 2007 15:20 GMT7
How many watts (or kW) of power can a 12 or 24 volt diesel engine
starter produce?
ram style bender07 Dec 2007 02:08 GMT12
I just bought a ram style tube bender and I tried bending a 2 inch
diameter exhaust pipe and the bend was so crappy!  it was as if the
tube was bent by hand without a die.
What can I do to make satisfactory bends with this bender?
Radiator Coolant Level06 Dec 2007 15:04 GMT1
All,
I have a '02 Hyundai Elantra and recently had a new head gasket put in
after an engine overheat.
Today I checked my coolant level.  The reservoir is full, but when I
dist cap ?06 Dec 2007 14:51 GMT10
is it possible for a cap to be over tightened so that the rotor hits inside
it?any thoughts. thanks
Pedal-powered Buick ticketed06 Dec 2007 05:42 GMT2
"An artist whose pedal powered Buick was pulled over by police
on its maiden voyage through the streets of Toronto is taking
his fight to court in the hopes of beating a traffic ticket issued
for operating an unsafe vehicle. The car, a 1986 Buick Regal,
Pages: 1 2 3 4 5 6 7 8 9 November, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.