I have a 1999 Honda Accord with an emissions P-Code 1457 which AllData
says is a vacuum leak or faulty solinoid at the rear area around the
vapor canister.  I ran all the tests and am still having difficulty
finding an answer.  Has anyone ever had this problem?  Thanks

Spec listed on the printout from my alignment shop.  Measured in
degrees.
The printout also lists all the other usual specs - including Thrust
Angle, and Total Toe(front & rear) that have been around since square

Does anyone know what the consequences are of putting motor oil into
an automatic transmission?  Specifically a GM front wheel drive 3
speed automatic (the 125C).
Someone I know had their transmission fluid changed, and the shop that

Does anyone know of a webpage that compares and reviews winter tires for
cars and rates
them against each other to determine, which one is the best.
I tried google without much success.

What causes a shock to go bad over time?
Apart from physical damage causing the oil to leak out or the seals to
go, I'm having a hard time thinking of why a shock absorber shouldn't
last the life of a car.  The only other things I can think of is the

I have a 92 thunderbird. I got this from my sister and it has been
running rough. It seems to cut in and out of when it will run right.
One minute it doesnt seem to want to go anywhere, the next it wants to
burn the tires and take off. I have to feather the gas in order to get

Hi all - Just a quick question - I have a 1987 Ford Taurus, 6 cylinder
3.0 L.  About six months ago a bought another car to work on for fun,
a 1993 Ford Taurus, also 6 cylinder 3.0 L.  I haven't had the time to
do any work on it, and now I'm moving.  My new place I only have room

1995 z28, V8, 150k miles, auto tranny
Driving home after work, stopped for gas, then pulled out and
accelerated, not aggressively (yet slightly spirited) heard a
hard "clunk" coming from the tranny (when shifting from 1-2)

Many of you responded to my previous post regarding my 94 Corsica having
very high voltage. My mechanic told me that when Autozone used the paperclip
method to attempt to read my OBD port, they did it wrong and damaged the
PCM. When he (my mechanic not Autozone) plugged his scantool ...

I'm likely to ask my mechanic about this when I get my car inspected
on Saturday, but I thought I would see what you all thought before
then.
My 2003 Cavalier has twice now completely shut off, (engine cuts,

Hey guys I'm hoping this gets answered rather quickly as I'm going to
make up my mind before I get into the garage I'm using tomorrow. My
coolant and oil mixed.. easy to diagnose... either the head gasket or
intake gasket. GM 3.1 V6 engines are notorious for the intake gaskets

When driving with cables, is it normal for there to be loud
vibrations
when not on snow?  How do most people deal with this?  Earplugs?

Greetings!!!
Blue C Technologies is a global provider for consulting and
outsourcing services.
Visit us on www.bluectech.in

I am having difficulty trying to get my sliding door to open on my Ford
aerostar. it has never worked since I got it 2 years ago I am wanting to
sell it , but would like to get it fixed. I need some advice on how to
get it to work I used to work in automotive shops , but never did ...

Anyone know if a BMW 328is will heat up without the engine on?