| Thread | Last Post | Replies |
|
| mazda 626 2002 egr valve problem | 29 Feb 2008 16:57 GMT | 5 |
Hello my car did not pass emissions, my mechanic replace the egr valve but this did not fix the problem. Has anyone had a similar problem any recommendations? thanks.
|
| Honda CRV auto trans | 29 Feb 2008 06:34 GMT | 3 |
Has anybody drained the fluid from their 2002-2006 CRVauto trans, ? the exact drain plug location would help me .
|
| Melissa Puente nude video gallery. Free movie clips, pics | 28 Feb 2008 19:39 GMT | 1 |
. . Melissa Puente nude video gallery. Free movie clips, pics
|
| Next winter Im buying Blizzak snow tires!! | 28 Feb 2008 18:42 GMT | 22 |
Have a 2000 Mazda Protege ES Normally run all season tires al year round here in north Missouri. But this winter has been so crappy that next year I'm
|
| Are Scion coupes 4-wheel-steer? | 28 Feb 2008 18:08 GMT | 1 |
Was following one of those little Scion coupes down the road earlier today and I swear I saw a tie rod end hanging down behind the rear suspension. Is there a four wheel steer option, or does one of the suspension links simply look like a tie rod end? I thought 4WS had
|
| china whholesale cheap bape nike mix jordan 1-23 shoes UGG boots | 28 Feb 2008 04:05 GMT | 1 |
Cheap Nike Air Jordan's Shoes;We sell cheap Nike Jordan's Shoes with discount, also Carry many New Jordan Shoes, most are Jordsan womens Shoes, some are jordan womens Shoes For Michael Jordan's Shoes and Nike Jordan Basketball shoes. We Wholesale Jordan Shoes with much
|
| Understanding "recycled" chassis drivetrains | 27 Feb 2008 19:56 GMT | 4 |
I have a quick question about how the auto manufacturers use a single chassis for multiple cars. For example, Honda uses the same chassis (apparently) for the CR-V and the Civic, or at least did at one point. In an application like this, are drivetrains interchangeable? For ...
|
| Irregular idling on diesel engine | 27 Feb 2008 18:14 GMT | 4 |
My girlfriend's 2002 Honda Civic, which has a 1.7 turbo diesel engine, runs very roughly when it is first started and generates quite a bit of black smoke. The engine sounds as if it is limping - as if it is running on only 3 out of 4 cylinders. After a few seconds it is fine and ...
|
| poor fuel milage | 27 Feb 2008 12:48 GMT | 5 |
I have a 96 Chevy Beretta with a 3.1 6, with about 74,000 miles. The fuel milage has been rather low running around 14 miles per gallon. This is mostly city driving with short trips less than 5 miles each trip. Is there anything I can do to improve the gas milage? The car ...
|
| Americas Pride Lifts, please read Ampro | 26 Feb 2008 21:18 GMT | 2 |
History of a nightmare, or how America's Pride does business In mid September of 2007, I ordered a 2 post 10000 lb lift from America's Pride in Seekonk Ma and paid via bank check. The first lesson in all of this is always pay via credit card, although it will not
|
| Ad in yesterday's (Sunday) newspaper classifieds. | 26 Feb 2008 19:41 GMT | 7 |
All the ad says is, '87 Ford Van $1400.And there is a local telephone number.Do those vans have fuel injection? If so, I don't want it. cuhulin
|
| Bad Cat converter | 26 Feb 2008 18:58 GMT | 2 |
I just had my emissions / smog check here in California for my 1987 Mercedes 300E and the NOx were really high. Very close to failing. I suspect a bad cat. I measure the temp of the cat with a fluke infrared
|
| 87 chevy nova vacuum | 26 Feb 2008 05:33 GMT | 1 |
Hey, I've got an old '87 chevy nova, my dad thinks it may have a vacuum leak. He can check the vacuum, but we need to know what the pressure should be. Anybody know?
|
| 94 Acclaim PARTLY fixed, need more ideas | 26 Feb 2008 02:38 GMT | 1 |
Summary to date: for a month or three the car would die quietly at stop lights. In the last week the car started to run very badly and throw a code. Fixed: the latest problem. I noticed coolant circulation problems and got suspicious of the radiator cap, replaced it. Now the car ...
|
| Grinding while turning the Crank question. Need help please | 26 Feb 2008 01:15 GMT | 14 |
1992 Silverado, 4.3L Was driving home and the bearings on the tensioner pulley broke and the pulley and belt both blew off. I coasted to the exit and into a gas station. Opened the hood and saw the pulley and belt missing. Truck was not yet overheated, thank
|