Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Maintenance and Repair / March 2008

Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Cool new tool21 Mar 2008 17:31 GMT20
Anyone who works on cars will love this new product: It's called Form-
A-Funnel, and you can watch a short video at http://www.formafunnel.com
that will explain its many uses.
This might be the most clever tool in any toolbox. Check it out!
Gauges not working: Oil pressure, engine temp, fuel21 Mar 2008 15:20 GMT2
Installed new FLT automatic tranny. Installed Kooks headers, with MSD
wires,
and new spark plugs. (150k miles 1995 Camaro Z28 (LT1), original O2
sensors).
Acura Brakes21 Mar 2008 04:16 GMT14
I'm planning to replace pads & rotors on my mother's 2000 Acura TL this
weekend. I've done lots of disk brakes but never on an Acura. Anything
special I should be aware of? Thanks...
Noisy Chev. 3.1 litre motor21 Mar 2008 03:03 GMT3
I own a 2001 Chev. Lumina with a 3.1 V-6 that has about 65,000 miles
on it. The motor is quite noisy when it is cold. More of a dull
tapping sound than a click. I do not like to drive it until it has
warmed up some. It quiets down after reaching full temperature. The
california emissions/50 state question20 Mar 2008 00:11 GMT12
If a 50 state car is brought into california, does the car have to be
brought up to california emissions standards to be registered in california?
Thanks Pat
IPC wiring harness connector for 1988 Toronado?19 Mar 2008 14:56 GMT9
Previously I'd had a discussion here about problems with my digital
instrument cluster intermittently going out.  I've discovered that I'm
not getting a good connection in the connector that the IPC plugs in
to in the dash.  What I'd like to do is find a junk Toronado and clip
Exhaust manifold no longer made- option?19 Mar 2008 04:11 GMT25
I've found it nearly impossible to find an exhaust
manifold for my '79 Ford Granada with the
250 ci six.   Mine is cracked in two.
No major auto parts stores carry it and Ford says
Retrain tires???18 Mar 2008 06:48 GMT6
This sensor is on and i have changed my valve stem. Does anyone know how to
retrain? I have gone to retrain and it keeps reading "aborted"?
I also read something about a magnet? Where can i get one?
Also i do not have an owners manual, otherwise i would have looked in it.
Where are the diesels?18 Mar 2008 02:21 GMT63
After much media coverage that diesels were coming real soon now, the
number of available diesels are not that many. My hunch on why this is
happening is the price of diesel fuel. Where I am in New York, diesel
fuel is priced above Regular Petrol grade by about 60 cents.
Volvo V70 oil pressure issue18 Mar 2008 01:32 GMT5
I'm working on a 200 Volvo V70-XC.  96K miles.  It's acting like there
might be an oil pressure problem.  Here's the story:
After a recent oil change, the oil warning light on the dash starts to
light on startup, goes out as soon as the revs are anywhere above
transmission replacement, steps17 Mar 2008 18:44 GMT1
would anyone know of links or subscription I would pay for to read about small truck
(4L30E GM tranny) transmission replacement?
if I can pay for some online manual (ie. Alldata ?) for walking me step-by-step of the
dismount and remount process of the transmission and torque ...
Brake repair question17 Mar 2008 18:32 GMT8
Please tell me if this sounds right.
The left front brake began squeaking on my 1994 Chevrolet Corsica. I know
that this often means that the brake pad is wearing down, so I took the car
to a local repair shop and dropped it off. Later in the day the mechanic
Jeep Mahindra Portugal16 Mar 2008 19:10 GMT1
Hi my name is Luis i am Portuguese, i want to support my cause to
bring the classic Jeep Mahindra mm540 dp new model thar to Portugal
please contact Sino Motors on Portugal and leave a note saying that
you want to have a Mahindra thar cj7 clone
Broken manifold bolt.15 Mar 2008 17:59 GMT7
Need some major help here. I replaced the cylinder heads on my 95 Ford
Aerostar. My problem is when I went about torquing the fasteners to he
intake manifold.. one of them broke off in the left head . its the one
thats in the rear outside.. I am not sure what to do about this.. Will
92 accord transmition problems14 Mar 2008 14:14 GMT2
can anybody tellme what can cause the problem with the sift in the
transmition
my car take a while to change the sift i ck the oil and is ok but the
problem persist.
Pages: 1 2 3 4 5 6 February, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.