| Thread | Last Post | Replies |
|
| Best Auto Repair Software / OBDII Code DB | 26 May 2008 01:33 GMT | 2 |
Best Auto Repair Software / OBDII Code DB Autotree Pro Ver. 1.45 is a 32 Bit ( WIN95-XP) software Application for automotive diagnostics. The program written in a Tree format to make systematic and quick diagnostic checks a breeze, organized by
|
| 1988 Corsica New Starter won't even turn over... | 25 May 2008 21:21 GMT | 2 |
We have a 1988 Corsica, it's always ran really good. Then it started getting Slower, and Slower Starting up. Then finally one day, it just wouldn't start up, It had a horrible noise, so we knew we had 3 options.
|
| "slapping" noise around fender when turning back and forth | 25 May 2008 17:19 GMT | 2 |
I have a 2005 Toyota Celica. I hear a "slapping" noise when I swerve the car a bit. It sounds very much like a piece of hose smacking up against metal. It appears to be coming from the area around the front passenger side fender. I removed the plastic protector under the ...
|
| Battery issues? | 24 May 2008 22:20 GMT | 4 |
I have a 94 Buick Skylark. It doesn't get a lot of use. I've only put 35,000 miles on it. Sometimes when I try to turn it on it seems to kill the battery. All the lights on the dashboard will go off. Trying to turn it on again soon after
|
| Non-friction braking system? | 24 May 2008 15:07 GMT | 20 |
I remember seeing on TV a while ago that there was someone trying to beat a land speed record. I really don't remember very many details of the show, but one thing I do remember is that they needed some way of stopping the vehicle very well, without locking up the wheels.
|
| 1994 ford areostar 3.0 | 24 May 2008 06:21 GMT | 1 |
when driving i here a humming noise any ideas any one
|
| Rudimentary Fuel Gage | 23 May 2008 21:57 GMT | 6 |
I am in the process of cleaning out my big old shed in my back yard because it is in bad shape and I am going to tear it down and build a new one.I found a long lenght of 1/4'' clear plastic flexible tubing.I tried out the tubing to see if it will go down the gas tank neck and on
|
| GM OBD1 and no O2 codes? | 23 May 2008 15:19 GMT | 37 |
We have a 1990 Cutlass Ciera that blew out the O2 sensor and went into limp home mode. The sensor physically blew out from rust. So I put a new Bosch one in and at about 500 km later, it starts acting exactly the same, with a miss all the way up the throttle and basically
|
| ATT: EBAY SELLERS-ISUZU OWNERS-BEWARE MATTHEW BUNNEY of QUEENSLAND, AUSTRALIA | 23 May 2008 13:29 GMT | 1 |
ATTENTION EBAY SELLERS- ADD THIS PERSON TO YOUR BLOCKED BIDDER LIST ! NAME: MATTHEW BUNNEY EMAIL ADDRESS- mattisuzu2@hotmail.com EBAY USERNAME- illusionsofgranduer
|
| Vauxhall Astra Sport Puffing Out Blue Smoke | 22 May 2008 15:01 GMT | 2 |
Hi, ive got a Vauxhall Astra 95 1.8 Sport which seems to be chucking out blue smoke which i suspect is an oil problem and so i checked the oil and it seemed abit low so i topped it up and after driving for about 40miles the oil level has gone down quite alot again, it also blew out ...
|
| Cadillac repairs advise requested | 21 May 2008 20:20 GMT | 7 |
Wanted some advise on this costly repair. The vehicle is a 1997 Cadillac Deville with 48,180 actual mileage with a Norstar V8 Engine. The vehicle has been stored for the Winter and now the ABS light and
|
| wheel balancing, glue strips to aluminum wheelframe | 21 May 2008 03:01 GMT | 3 |
how can the black glue strip be removed safely from an aluminum wheel inner frame when replaced during a local trip to have high speed wheel balance done? the shops simply remove the weights but leave the old glue pad/pack to the
|
| Likely causes of vibration when braking? | 20 May 2008 20:26 GMT | 11 |
I'm dealing with a 1994 Toyota 4Runner with the 3.slow engine and about 190k miles on the chassis. Lately and increasingly, there is a *lot* of vibration when braking from over 40mph or so. I believe that this comes from the front end because I
|
| Cutting A Cat Out | 20 May 2008 10:35 GMT | 20 |
Could anybody tell me how difficult it would be to cut a severely clogged cat that's also rattling out of of a 2" exhaust system using a hand-held utility saw with a metal blade, assuming there's enough room to operate?
|
| Door stuck closed | 19 May 2008 15:31 GMT | 5 |
I have a 98 Dodge RAM van. The passenger side front door is stuck locked. The power lock actuator is making some noise, while trying to unlock the door (so it's not that a fuse, or the actuator itself is deat). It doesn't work - I tried many times to open the door
|