| Thread | Last Post | Replies |
|
| Dropped valve migrating? | 30 Jan 2009 04:42 GMT | 11 |
My boss is a dedicated dirt-track Sprint car fan. On account of him I ended up a few days ago talking to a racer who competes at a track my boss sponsors. This guy's pretty good: he's actually won a race or two. He was telling me his team likes to run the engine extra-rich, ...
|
| s10 obd2 operation | 30 Jan 2009 02:33 GMT | 2 |
2002 S10. MIL has gone on/off a few times. Bought a cheap code reader. With light on it had a p0137 and a pending p0137 (bank1 sensor2 oxygen sensor lean condition). Manual says MIl will go off after 3 ignition cycles that the P0137 test passes. MIL has now gone off, but the
|
| Hint for steering hose removal? | 29 Jan 2009 01:53 GMT | 5 |
When a hose -- such as the power steering hose at the reservoir -- is extremely difficult to get off the nipple, is there a tried and true method for getting it off without permanently damaging it? Due to the location and lack of accessibility, I can't get enough force on it. ...
|
| New cruise control add on called speederaser | 28 Jan 2009 16:00 GMT | 4 |
Guys, I would appreciate any feedback on this new product. We all love our cruise-control. Wouldn't it be nice to be able to use it more often, even on surface
|
| What's the current recommend on batteries? | 28 Jan 2009 15:21 GMT | 56 |
Who currently makes the best batteries for your car? I've finally kept a car long enough to wear out a battery I think - the 944 was not happy at all trying to start in the single digit weather we had yesterday morning. I know the starter is good because I just had it rebuilt a ...
|
| Rotor manufacturers..Who to stay away from? | 28 Jan 2009 03:40 GMT | 9 |
Shortly I will be doing a brake job on a 2003 Blazer. There seems to be a lot of expertise in this group so I am hoping that I can make the correct choice on my rotor purchase.
|
| ABS and OBD II code reader. | 27 Jan 2009 23:26 GMT | 2 |
I have been thinking of buying one of those code readers and wondered if it would diagnose why my ABS light is on in my truck or if that requires another type of reader?
|
| Bushing Installation Question | 27 Jan 2009 03:03 GMT | 31 |
I've finally begun installing the new bushings on my '88 Civic; this is a Prothane total kit which covers everything but the two large trailing arm bushings. One obvious difference between these and the originals, that caught my attention, is with the inner upper control-arm ...
|
| VeraSun to put 7 plants up for auction. | 26 Jan 2009 22:05 GMT | 40 |
www.lucianne.com/thread/?artnum=446365 cuhulin
|
| A technical question on batteries in general. | 26 Jan 2009 19:42 GMT | 3 |
I'm shopping for a deep cycle battery to power fans, lights, etc in a small camper. I don't have a strict size limit as I'll buy the box to fit whatever battery I get. An Optima "Yellow Top" D51 will probably give me enough power and the
|
| 2001 Dodge Grand Caravan gauges gone wild! | 26 Jan 2009 18:44 GMT | 7 |
Okay, this one's just weird! The day before yesterday, while my wife was driving our 2001 Dodge Grand Caravan, all of the dash gauges in the instrument cluster lost their mind and started clicking back and forth in an erratic manner.
|
| 99 Dodge Durango 4x4 | 26 Jan 2009 13:44 GMT | 6 |
Customer has a problem with it shifting out of overdrive when he slows down. Sounds like a sensor, but not sure which one. The TPS was replaced about a year ago. Any ideas?
|
| Door Locks Don't Move in Cold Temperatures | 25 Jan 2009 15:45 GMT | 4 |
When the outside air temperature is in the 20's or lower, some of the door locks on my 2000 Ford Taurus don't move - so you cannot lock or unlock the car. The power door lock actuator energizes, and you hear the familiar clunk of a lock being turned, but the lock doesn't
|
| Final Price to Repair Gran Marquis Frame etc | 25 Jan 2009 13:23 GMT | 5 |
I recently posted ere about my 98 Gran Marquis accident that bent the frame. The damage caused the driver side front wheel to bend in at the top out at the bottom. The frame was bent near the upper control arm mounting surface. The
|
| 1/6th scale Chevrolet V8 | 23 Jan 2009 19:02 GMT | 4 |
www.libertypost.org/cgi-bin/readart.cgi?ArtNum=253107 Nice little working scale model engine that guy built.There have been other people who have built similar scale model.engines before. cuhulin
|